Bedienungsanleitung DeWalt DW743 T 6 (Seite 34 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546233

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Optional accessories

Prior to assembling any accessories always unplug the machine.

Dust extraction kit (fig. A1, A2 & A8)

This machine is provided with three dust extraction points for use in each

mode.

• Whenever possible, connect a dust extraction device designed in

accordance with the relevant regulations regarding dust emission.

Connecting - mitre saw position

• Connect one hose to the under-table guard.

• Connect one hose to the small diameter outlet (11) and one to the

large diameter outlet (23) using the corresponding spouts.

• Connect the hoses to the 3-way connector.

• Connect the single outlet of the 3-way connector to the hose from the

dust extractor.

Connecting - saw bench position

• Replace the saw blade guard by the guard supplied with the dust

extraction kit and connect the hose from the under-table guard to it.

• Proceed as for mitre saw position.

Mitre saw extra support/length stop (fig. A4)

The extra support and length stop can be mounted on the left-hand side

or on the right-hand side, or with two sets on either side.

• Fit the items 34 - 41 onto the two guide rails (35).

• Use the inclinable support (36) for cross-cutting 210 mm wide boards

(15 mm thick).

Roller support table (fig. A5)

In mitre saw mode, the roller support table can be mounted on the left-hand

side or on the right-hand side, or with two sets on either side. In saw bench

mode, it can also be mounted in front or at the rear of the saw table.

Side extension table (fig. A6)

The side extension table increases the distance from the rip fence to the

blade to 600 mm or more, depending on the rod length fitted to the

machine and the clamped position of the table.

The side extension table must be used in conjunction with guide rails (35)

(option). The adjustable table is equipped with an engraved scale along its

front edge and mounted on a sturdy base which clamps to the guide rods.

• Fit the extension table to the right-hand side of the machine for

continuity of the distance scale on both tables.

Single sliding table (fig. A7)

This sliding table (44) allows for board sizes to the left of the blade up to

1200 x 900 mm.

The guide rods are mounted on a sturdy alloy extrusion which is quickly

detachable from the machine and yet fully adjustable is all planes.

The fence incorporates a full length measuring tape for quick positioning of

an adjustable stop and an adjustable support for narrow workpieces.

Transporting

Always transport your saw in saw bench mode with the upper blade guard

fitted. Remove the legs.

Maintenance

Your DEWALT machine has been designed to operate over a long period

of time with a minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication

The bearings of the motor are pre-lubricated and watertight.

• Slightly oil the rotating table bearing surface where it slides on the lip of

the fixed table at regular intervals.

• Clean the parts subject to accumulation of sawdust and chips

periodically with a dry brush.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair agent where it will be

disposed of in an environmentally safe way.

GUARANTEE

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of your

EWALT machine, simply return it within 30 days, complete as

purchased, to the point of purchase, for a full refund or exchange.

Proof of purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your DEWALT machine, in the

12 months following purchase, it will be undertaken free of charge at

an authorized D

EWALT repair agent. Proof of purchase must be

produced. Includes labour and spare parts for Power Tools. Excludes

accessories.

• ONE YEAR WARRANTY •

If your DEWALT product becomes defective due to faulty materials or

workmanship within 12 months from the date of purchase, we

guarantee to replace all defective parts free of charge or, at our

discretion, replace the unit free of charge provided that:

• The product has not been misused.

• Repairs have not been attempted by unauthorized persons.

• Proof of purchase date is produced.

This guarantee is offered as an extra benefit and is additional to

consumers statutory rights.

For the location of your nearest authorized D

EWALT repair agent,

please use the appropriate telephone number on the back of this

manual. Alternatively, a list of authorized D

EWALT repair agents and full

details on our after-sales service are available on the Internet at

www.2helpu.com.

en - 8 25

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW743 T 6 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info