Bedienungsanleitung DeWalt DW754 T 2 (Seite 28 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546919

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

17. Avoid unintentional starting.

Do not carry the tool with a finger on the switch.

Be sure that the tool is in the “off” position

before plugging in.

18. Use outdoor extension leads.

Before use, inspect the extension cable and

replace if damaged. When the tool is used

outdoors, use only extension cords intended for

outdoor use and marked accordingly.

19. Stay alert.

Watch what you are doing. Use common

sense. Do not operate the tool when you are

tired or under the influence of drugs or alcohol.

20. Check for damaged parts.

Before use, carefully check the tool and mains

cable to determine that it will operate properly

and perform its intended function. Check for

alignment of moving parts, binding of moving

parts, breakage of parts, mounting and any

other conditions that may affect its operation. A

guard or other part that is damaged should be

properly repaired or replaced by an authorized

service centre unless otherwise indicated in

this instruction manual. Have any damaged or

defective switches replaced by an authorised

service center. Do not use the tool if the switch

does not turn it on and off. Never attempt any

repairs yourself.

WARNING! The use of any accessory

or attachment or performance of any

operation with this tool other than those

recommended in this instruction manual

may present a risk of personal injury.

21. Have your tool repaired by a qualified

person.

This electric tool complies relevant safety rules.

Repairs should only be carried out by qualified

persons using original spare parts; otherwise

this may result in considerable danger to the

user.

Additional Safety Rules for Grinding

and Honing Machines

• Use only grinding and honing wheels carrying

a label stating the manufacturer, the type of

bonding material, the dimensions and the

maximum speed of the wheel, and complying

with EN 12413.

• Do not use grinding and honing wheels with a

maximum speed lower than the speed of the

machine (see technical data).

• Do not use grinding and honing wheels that do

not conform to the dimensions stated in the

technical data. Do not use any spacers to make

a wheel fit onto the spindle.

• Replace a grinding or honing wheel as soon as

it has worn by more than ca. 40 mm.

• Always strictly follow the instructions when

replacing a grinding or honing wheel.

• Before fitting a new grinding or honing wheel, it

must be checked for cracks by suspending it on

a thin cord and striking it gently with a hammer.

The wheel should produce a clear sound. If not,

the wheel is damaged and must not be used.

• Regularly check a grinding or honing wheel for

alignment. If the wheel is running out of centre

or out of balance, it must be replaced.

• Always store grinding and honing wheels in a

dry place.

• Only use the machine at ambient temperatures

from 5 °C to 40 °C.

• Switch on the machine and let the wheel run

with no load for at least 30 seconds before use.

• Always wear safety goggles when grinding dry.

• Never grind magnesium tools.

WARNING: Use of this machine can

generate dust containing chemicals

known to cause cancer, birth defects

or other reproductive harm. Use

appropriate respiratory protection.

WARNING: Do not use the machine

in the vicinity of any highly inflammable

materials.

Residual Risks

The following risks are inherent to the use of these

machines:

– injuries caused by touching the rotating parts,

– injuries caused by disruption of the grinding

wheel.

These risks are most evident:

– within the range of operation,

– within the range of the rotating machine parts.

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of accidents caused by the uncovered

parts of the rotating wheel or belt.

– Risk of injury when changing the wheel or belt.

– Risk of squeezing fingers when opening the

guards.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW754 T 2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW754 T 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info