Bedienungsanleitung DeWalt DW952 (Seite 23 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

447156

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

17 en - 2

EC-Declaration of conformity

DW952/DW953/DW954/DW958

DEWALT declares that these Power Tools have been

designed in compliance with: 89/392/EEC,

89/336/EEC, 73/23/EEC, EN 50144,

EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 &

EN 61000-3-3.

For more information, please contact DEWALT at the

address below, or refer to the back of the manual.

Level of sound pressure according to 86/188/EEC &

89/392/EEC, measured according to EN 50144:

DW952 DW953

DW954 DW958

(sound pressure) dB(A)* 70 70

(acoustic power) dB(A) 85 85

* at the operator’s ear

Take appropriate measures for the

protection of hearing if the sound

pressure of 85 dB(A) is exceeded.

Weighted root mean square acceleration value

according to EN 50144:

DW952 DW953

DW954 DW958

< 2.5 m/s

Director Engineering and Product Development

Horst Großmann

DEWALT, Richard-Klinger-Straße 40,

D-65510, Idstein, Germany

Safety instructions

When using Power Tools, always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and

personal injury. Read the following safety

instructions before attempting to operate this

product. Keep these instructions in a safe place!

General

1 Keep work area clean

Cluttered areas and benches can cause accidents.

2 Consider work area environment

Do not expose Power Tools to humidity.

Keep work area well lit. Do not use Power Tools

in the presence of flammable liquids or gases.

3 Guard against electric shock

Prevent body contact with earthed surfaces

(e.g. pipes, radiators, cookers and refrigerators).

For use under extreme conditions (e.g. high

humidity, when metal swarf is being produced,

etc.) electric safety can be improved by inserting

an isolating transformer or a (FI) earth-leakage

circuit-breaker.

4 Keep children away

Do not let children come into contact with the

tool or extension cord. Supervision is required for

those under 16 years of age.

5 Store idle tools

When not in use, Power Tools must be stored in

a dry place and locked up securely, out of reach

of children.

6 Dress properly

Do not wear loose clothing or jewellery.

They can be caught in moving parts.

Preferably wear rubber gloves and non-slip

footwear when working outdoors. Wear

protective hair covering to keep long hair out of

the way.

7 Wear safety goggles

Also use a face or dust mask in case the

operations produce dust or flying particles.

8 Beware of maximum sound pressure

Take appropriate measures for the protection of

hearing if the sound pressure of 85 dB(A) is

exceeded.

9 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW952 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info