Bedienungsanleitung DeWalt DWE396 (Seite 29 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546640

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

ENGLISH

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. On/off trigger switch

b. Lock-off button

c. Rear grip handle

d. Front handle

e. Saw blades

f. Bar

g. Hex key

h. Dust port

INTENDED USE

Your DEWALT alligator saw DWE396, DWE397,

DWE398 and DWE399 has been designed for

professional sawing applications of clay building

blocks, cellular concrete, wood, plastic and

insulation materials with suitable saw blade.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DEWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved 3–

core extension cable suitable for the power input of

this tool (see technical data).The minimum conductor

size is 1.5 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

Replacing the Saw Blades

REMOVING THE SAW BLADES (FIG. 2–5)

1. Place the tool upside down on a flat, stable

work surface.

2. Loosen the gearcase cap screw (k) with

the hex key (g). When loosened, the gearcase

cap (l) should release and spring open.

3. With the hex key (g), loosen both of the blade

setting screws (m). The screws will be held in

place by the screw clips.

4. Carefully pull the saw-blade-end up until it is

disengaged from and clear of the Blade-Clamp-

system.

5. Pull the saw blade back and out of the front

guard (n) and take it off of the bar (f).

6. Repeat this procedure for the other saw blade.

FITTING THE SAW BLADES (FIG. 4)

1. Slide one saw-blade into the blade guide slot (i)

making sure that the end with the slotted hole

(p) fits into the front guard (n).

2. Slide the back of the saw blade down until the

threaded hole (o) aligns with the blade setting

screw (m).

3. Repeat this procedure for the other saw blade.

4. Tighten both saw blade setting screws (m)

securely by pressing and turning simultaneously

with the short end of the hex key (g).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE396 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info