Bedienungsanleitung DeWalt DWE398 (Seite 28 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546642

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

ENGLISH

5) SERVICE

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional Safety Rules for Alligator

Saws

• Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

PLUGGING INTO THE MAINS, SWITCHING ON AND OFF

• Always ensure that the alligator saw is switched

OFF before plugging into the mains.

• After switching OFF, never attempt to stop the

saw blades with your fingers.

Never put the saw down on a table

or work bench unless switched OFF.

The saw blades will keep running up to

10seconds after the machine has been

switched OFF.

WHEN SAWING

• Remove all nails and metal objects from the

workpiece before starting work.

• Wherever possible, use clamps and vices to

fasten the workpiece securely.

• Do not attempt to saw extremely small

workpieces.

• Do not bend too far forward. Make sure

that you always stand firmly, particularly on

scaffolding and ladders.

• Always hold the saw with both hands.

• Do not use the saw for cutting curves and

pockets.

CHECKING AND CHANGING THE SAW BLADES

• Unplug the tool before cleaning or changing the

saw blades.

• Only use DEWALT saw blades conforming to

the specifications contained in these operating

instructions.

• Only sharp saw blades in perfect working

condition should be used; cracked or bent saw

blades should be discarded and replaced at

once.

• Always use suitable gloves when handling the

saw blades and rough work materials.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Do not expose the power tool to humidity.

Do not use the power tool if the main

cable is damaged.

DATE CODE POSITION (FIG. 1)

The Date Code (q), which also includes the year of

manufacture, is printed into the housing.

Example:

2012 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Alligator saw

1 TCT saw blade set for low density building

block (DWE396, DWE397)

1 TCT saw blade set for medium density building

block (DWE398)

1 TCT saw blade set for cellular concrete and

plaster board (DWE399)

1 Hex key

1 Cutting slot scraper (DWE399 only)

1 Instruction manual

1 Exploded drawing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE398 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info