Bedienungsanleitung DeWalt DWE46101 T 1 (Seite 39 von 192) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

548624

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

ENGLISH

• Air vents often cover moving parts and

should be avoided. Loose clothes, jewelry or

long hair can be caught in moving parts.

• Threaded mounting of accessories must match

the grinder spindle thread. For accessories

mounted by flanges, the arbor hole of the

accessory must fit the locating diameter of

the flange. Accessories that do not match the

mounting hardware of the power tool will run

out of balance, vibrate excessively and may

cause loss of control.

• The grinding surface of the centre depressed

wheels must be mounted below the plane of

the guard lip. An improperly mounted wheel

that projects through the plane of the guard lip

cannot be adequately protected.

WARNING: When not in use, place

tool on its side on a stable surface

where it will not cause a tripping

or falling hazard. Serious personal

injury may result.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of personal injury due to flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

– Risk of dust from hazardous substances.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG.1)

The date code (o), which also includes the year of

manufacture, is printed into the housing.

Example:

2012 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Mortar raking motor

1 Side handle

1 Wrench

1 Universal connector

1 125 mm Mortar-raking shroud

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g.1, 2)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

FIG.1

a. Spindle lock button

b. Spindle

c. Side handle

d. Anti-lockup backing flange

e. Threaded clamp nut

f. Dust ejection system (DES)

g. Slider switch

FIG.2

h. Dust port

i. Clamp adjusting screw

j. Depth of cut shoe

k. Depth of cut shoe locking knob

l. Cornering door locking lever

(locks and unlocks cornering door)

m. Cornering door

(opens and allows cutting of an inside corner)

n. Clamp lever

INTENDED USE

The DWE46101 heavy-duty slot cutter has been

designed for professional cut-off applications.

Your mortar raking shroud has been designed

for professional mortar raking applications. It is

not intended for use with metal or wood. Using

the appropriate grinder, wheel and dust extractor

vacuum, it can be used to remove the vast majority

of static and airborne dust which without the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE46101 T 1 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info