Bedienungsanleitung DeWalt DWE6423 (Seite 22 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712392

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

metals. Do not operate the tool near

flammable liquids, gases or dust.

Sparks or hot particles from sanding

or arcing motor brushes may ignite

combustible materials.

WARNING: We recommend the use of

a residual current device with a residual

current rating of 30mA or less.

Sanding Paint

WARNING: Observe the applicable

regulations for sanding paint. Pay

special attention to the following:

• Whenever possible, use a vacuum extractor

for dust collection.

• Take special care when sanding paint which

is possibly lead based:

– Do not let children or pregnant women

enter the work area.

– All persons entering the work area should

wear a mask specially designed for

protection against lead paint dust and

fumes.

– Do not eat, drink or smoke in the

work area.

• Dispose of dust particles and any other

removal debris safely.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

DATE CODE POSITION (FIG. 1)

The Date Code (h), which also includes the year of

manufacture, is printed into the housing.

Example:

2015 XX XX

Year of Manufacture

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc., in accordance with these

instructions taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional Speciﬁ c Safety Rules for

Sanders

WARNING: Contact with or inhalation

of dusts arising from sanding

applications may endanger the health of

the operator and possible bystanders.

Wear a dust mask specifically designed

for protection against toxic dust and

fumes and ensure that persons within

or entering the work area are also

protected.

WARNING: Use this tool in a well-

ventilated area when sanding ferrous

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE6423 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info