Bedienungsanleitung DeWalt DWST08810 (Seite 7 von 10) (Englisch)

712271

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

12 13

English English

LCD INDICATORS

When the appliance is turned OFF When the appliance is turned ON

When charging a battery pack while the

appliance is turned off, a large battery image

is displayed in the center of the LCD screen

showing the battery pack charging status.

When the DWST08810 is on, indicators for

the power supply and the battery status are

displayed on the lower right portion of the LCD

screen.

Battery pack is empty

Appliance is operating via the AC/

DC power adaptor

Battery pack level is low Battery level is low

Battery pack is partially charged Battery is partially charged

Battery pack is fully charged Battery is fully charged

Hot/Cold Delay

This charger has a hot/cold delay

feature: when the charger detects a

battery that is hot, it automatically

starts a delay, suspending charging

until the battery has cooled. After

the battery has cooled, the charger

automatically switches to the

pack charging mode. This feature

ensures maximum battery life.

Hot/Cold delay of charging

Faulty Battery Packs

This charger will not charge a

faulty battery pack. The charger

will indicate faulty battery pack by

displaying an X on the LCD battery

image. If this occurs, re-insert the

battery pack into the charger. If the

problem persists, try a different

battery pack to determine if the

charger is working properly. If the

new pack charges correctly, then

the original pack is defective and

should be returned to a service

center or other collection site for

recycling. If the new battery pack

elicits the same trouble indication

as the original, have the charger

and the battery pack tested at an

authorized service center.

NOTE: This could also mean a

problem with a charger

Problem with the battery pack or

charger

CHARGING A BATTERY PACK

The DWST08810 includes a top compartment

that is mainly used to store and protect the

AC/DC power adaptor when not in-use.

1. Open the top compartment to take out

the AC/DC power adaptor (see Figure 1

and Figure 3).

2. Plug the charger AC/DC power adaptor

into an appropriate outlet and connect it

to the DWST08810 power-in port before

inserting the battery pack (see Figure 2).

3. Open the battery pack cover by releasing

its two latches (see Figure 2).

WARNING: To reduce the risk of injury, turn the appliance off and disconnect it from the

power outlet when not in use and when making repairs. DO NOT attempt to disassemble the

unit; take it to an authorized service center when service or repair is required.

OPERATION

The DWST08810 will operate when

connected with the AC/DC power adaptor

and/or when operated solely on battery

power.

NOTE: When the DWST08810 is connected

by the supplied power supply unit to the

outlet it will charge the installed battery.

Unplugged, the appliance can run up to

8 hours on a fully charged battery using a

premium 20V MAX* 2 Ah Li-ion battery. Using

batteries of lower voltage and amp hours will

yield less run time.

This appliance can be operated in the vertical

or horizontal position.

* With respect to 20V MAX* - Maximum

initial battery voltage (measured without a

workload) is 20 volts. Nominal voltage is 18.

Button Functions

The front panel includes a selection dial and

pushbuttons.

.......Selection dial (the selection dial has

more than one function)

...........On/Off button

...........Back button

...........Source selection button

...........Bluetooth button

........Preset buttons

Powering ON and OFF

Press the POWER button ( ) for 1 second.

The appliance turns on to the last selected

audio source.

Press the POWER button (

) for 3 seconds.

The appliance turns off.

4. Insert the battery pack (not included)

into the charger, making sure the pack is

fully seated in the charger

(see Figure 4). The battery indicator

image will blink continuously, indicating

that battery charging is in process.

NOTE: Close the battery pack cover and

check it is tightly closed.

5. The completion of charging will be

indicated by a steady battery indicator

image. The pack is fully charged and

may be used at this time or left in the

charger.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWST08810 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info