739138
7
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
9 10
Start cleaning
Press the START button on the vacuum
cleaner or the ON/OFF button on the
remote control to start cleaning.
Before starting cleaning, make sure the
vacuum is not in sleeping mode. If yes,
press the START or ON/OFF button to wake
it up.
The START button doesn’t have light in
sleeping mode. It turns yellow in standby
mode and turns green when working.
Product Operation
Stop cleaning
When the vacuum cleaner is working, press the START or ON/OFF button to stop it.
After stopping it, the START button will turn yellow. And it will turn to sleeping
mode if there is no operation in 30 seconds.
Sleeping
When in sleeping mode, press the START or ON/OFF button can wake it up.
When in standby mode, long press the START button to turn to sleeping mode.
When in standby mode, the vacuum will turn to sleeping mode if there is no
operation in 30 seconds.
Product Operation
Cleaning Modes
Cleaning paths
This vacuum has several cleaning paths, which can automatically switch according
to different surface types.
The default mode when starting the vacuum is Auto mode. And it will switch the 4
cleaning paths automatically depending on different floor types.
Spot cleaning
In standby mode, press the button on the remote control and the vacuum will
turn to spot cleaning mode.
This mode is suitable for cleaning at a dirtier area. The vacuum will spiral intensively
until it finishes cleaning the dirty spot.
Scheduling
In standby mode, press the PLAN button to set the scheduling time
Once scheduled, the vacuum will clean at a certain time 7 days a week.
Recharging
When the battery is low, press the button on the vacuum or the button on
the remote control to make it go for recharging.
When it is working and the battery is low, the vacuum will automatically go back to
the charging base for recharging.
Auto cleaning path
Zig-zag cleaning path
Edge cleaning path
V cleaning path
Scheduling setting
Please use the remote control to set the scheduling. Once successfully scheduled, the
vacuum will clean at a certain time every day.
Before setting the time, make sure the START button is green. If the vacuum is in
standby mode, press the START button to wake it up first.
Set the clock time
Press the CLOCK button, and the
left 00 of the 00:00 will flash.
After finishing the setting, press
the CLOCK button to save the
setting.
Press the to set the hour and
minute, press the to change
between the hour and minute.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dibea D960 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dibea D960

Dibea D960 Bedienungsanleitung - Deutsch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info