Bedienungsanleitung Dietz SANGO advanced SEGO junior F (Seite 43 von 48) (Englisch)

749907

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

11.2. Warranty provisions

The manufacturer shall not provide any warranty if:

• the product has been passed on to a dierent owner. The warranty applies

only to the rst owner to whom the manufacturer supplied the product/parts.

The warranty is not transferable and applies only to those models bought from

the manufacturer;

• the product/part is damaged as a result of carelessness, an accident or

improper use;

• the product/part has not been maintained in accordance with the maintenance

instructions stated in the user manual;

• non-original parts have been used;

• the original type plate is no longer attached to the product;

• external/internal changes have been made to the product features. If a dealer

wants to modify a product/part contrary to the instructions given in the user

manual, the dealer must rst consult with the manufacturer;

• force majeure, such as ooding or re, is involved.

If the provisions stated provide no resolution, the manufacturer's decision shall be

nal.

11.3. Warranty procedure

If a defect is identied in a product or part and it needs to be sent to the

manufacturer, the dealer must ll in the returns form in full. The returns form will

be used as the guiding document for the whole warranty procedure.

Procedure for making claims under the warranty:

• If a product/part becomes defective or needs to be repaired or replaced, the

user should contact his/her local dealer. The dealer can then make a claim

under the warranty if required.

• On identifying the defect, the dealer informs the manufacturer immediately,

providing full information relating to the nature of the defect aecting the

product/part supplied by the manufacturer;

• If it is possible for the warranty claim to be dealt with by telephone or e-mail

and the manufacturer deems the warranty claim to be legitimate, the dealer

and the manufacturer consult with each other to determine whether the

manufacturer will send a replacement product or part to the dealer free of

charge. In such cases, the dealer must

• destroy the defective product/part on the instructions of the manufacturer.

• Alternatively, the defective product/part must be returned to the

manufacturer. In the case of a return, the manufacturer shall be responsible

for arranging and paying for transport;

• If it is not possible to deal with a warranty claim by telephone or e-mail, the

dealer and the manufacturer consult with each other to determine:

• whether the dealer should send the defective product/part back to the

manufacturer. The manufacturer then assesses the product/part in

question. If the manufacturer deems the claim to be justied, the product

or part is repaired and/or replaced. The costs for returning the product/part

to the dealer are to be borne by the dealer;

SANGO advanced / slimline / junior - 43

11 Warranty conditions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dietz SANGO advanced SEGO junior F Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dietz SANGO advanced SEGO junior F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info