Bedienungsanleitung Dik Geurts Instyle 800V (Seite 42 von 112) (Deutsch, Englisch, Holländisch, Französisch)

695347

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

English

INSTALLATION MANUAL

9.5 Frames

The appliances can be fitted with various frames. The frames are adjustable in depth and can be fitted so they are

parallel to the door.

!Caution

The installation depth of the appliance depends on the selected frame (see Annex 2, fig. 1)!

When assembling the frame proceed as follows:

Tip!

First remove the door before assembling the frame.

In-built frame (no frame):

Remove the 4 pre-assembled bolts/nuts (see Appendix 2, Fig. 11).

Slide the frame over the stove into the desired position (see Appendix 2, Fig. 12).

Fasten the 4 bolts and nuts (the bolts on the inside, the nuts on the outside of the appliance)

(see Appendix 2, Fig. 13).

Fasten the 2 bolts and nuts on top of the appliance (see Appendix 2, Fig. 13).

Other frames:

Loosen the 4 pre-assembled bolts (see Appendix 2, Fig. 14).

Slide the frame in the convection casing between the loosened bolts and the bolts still tight in the appliance

(see Appendix 2, Fig. 15).

Tighten the nuts. The frame is now clamped between the nuts (see Appendix 2, Fig. 16).

9.6 Adjustable feet

In order to promote a stable set-up, these appliances are provided with adjustable feet (see Annex 2,

fig. 3). These feet can be adjusted by means of the supplied socket screwdriver.

Remove the vermiculite from the bottom (see paragraph 9.7.1.3.1 Instyle / Prostyle 700 / 800 / 1000 or 9.7.2.4.1

Instyle / Prostyle Tunnel.)

Turn the socket screwdriver to the right in order to adjust the fire upwards, and to the left to adjust the fire

downwards.

9.7 Supplementary installation instructions per appliance

9.7.1 Instyle / Prostyle 700 / 800 / 1000

9.7.1.1 Outside air connection

It is possible to provide the fire with an outside air connection. This outside air connection is optionally available

as an (external air) kit. This kit can be used for a connection either on the bottom or rear of the appliance and is

available through your supplier. First determine if you want a connection on the bottom or rear side.

Proceed as follows with a connection on the bottom (see Appendix 2, Fig. 17a + 17b):

Fasten the ‘pipe opening’ with 4 screws to the small housing.

Remove the 4 screws on the bottom side of the appliance.

Then bring the small housing with assembled ‘pipe opening’ against the plate on the bottom of the appliance.

Re-use the 4 screws to assemble the small housing.

Connect the flexible hose (Ø 80 mm) to the round ‘pipe opening’ of the outside air connection.

Dispose of unused parts in the appropriate way.

Proceed as follows with a connection on the rear (see Appendix 2, Fig. 17c + 17d):

Use a hammer to break the rectangular plate out of the rear of the appliance.

Also break out the side baffle in the middle of the external air kit.

Fasten the ‘pipe opening’ with 4 screws to the small housing.

Assemble the large housing on the small housing using 2 screws and set this to the correct length for the relative

appliance.

Remove the 6 screws on the bottom side of the appliance.

Then bring the outside air connection against the plate on the bottom of the appliance.

Re-use the 6 screws to assemble the external air kit.

Connect the flexible hose (Ø 80 mm) to the round ‘pipe opening’ of the outside air connection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dik Geurts Instyle 800V Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dik Geurts Instyle 800V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info