Bedienungsanleitung Dimplex Cadiz Eco CDE3TIE (Seite 5 von 8) (Englisch)

798033

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

DIGITAL TIMER OPERATION

(see ‘z’ in Fig. 3 & Fig. 5)

(CDE2TI & CDE3TIE models only)

IMPORTANT: Remember to observe all safety warnings

when operating the heater on auto setting, either attended

or unattended.

The timer allows you to select ‘AUTO’ or ‘MAN ON’ by

pressing the ‘MODE’ button until the required MODE

appears at the bottom of the timer display.

‘AUTO’ MODE allows the heater to switch ON and OFF

according to a set 24 Hour program period (see ‘Setting

Programs’ section below).

‘MAN ON’ MODE allows power to the heater uninterrupted

by the program settings.

Key Lock:

If ‘ENTER’ and ‘MODE’ are pressed within 1 second, the

keys will be locked. The user will know the keys are locked

as the lock symbol ‘ ’ will be displayed on the top left hand

corner of the screen. To unlock the keypad, press ‘ENTER’

and then ‘MODE’ within 1 second.

Initial Operation

For initial use, plug the heater into a regular household

power point and turn the power on. The timer is now ready

to be set up for use.

Setting Current Time

1. Hold the ‘PROGRAM’ button until the clock symbol

appears on the screen. The user can now set the clock.

2. The hour digit will ash. To adjust the hour use the ‘-’ &

‘+’ buttons. Conrm the hour digit by pressing ‘ENTER’.

3. Once ‘ENTER’ has been pressed the minutes will ash.

To adjust the minutes use the ‘-’ & ‘+’ buttons. Conrm the

minute digit by pressing ‘ENTER’.

4. The timer now returns to the default display.

5. To reset incorrect time, repeat previous steps.

Once the correct time is set, a total of four ON/OFF time

programs can be set for operation.

Setting Programmes

Press the ‘PROGRAM’ key to set the programs.

You are now setting the programs starting with P1 ‘ON’.

SETTING P1 ON TIME:

1. To set the hour use the ‘-’ & ‘+’ buttons. Conrm the hour

digit by pressing ‘ENTER’.

2. To set the minutes use the ‘-’ & ‘+’ buttons. Conrm the

minute digit by pressing ‘ENTER’.

Note: The minutes can only be set in 10 minute blocks in

programme ‘MODE’.

SETTING P1 OFF TIME:

3. To set the hour use the ‘-’ & ‘+’ buttons. Conrm the hour

digit by pressing ‘ENTER’.

4. To set the minutes use the ‘-’ & ‘+’ buttons. Conrm the

minute digit by pressing ‘ENTER’.

Repeat steps 1 to 4 to programme P2, P3 & P4. After

programming P4 ‘OFF’ you automatically exit to the default

display.

At any time while programming the timer you can press the

‘PROGRAM’ button to exit to the default display.

Note: If the ‘ON’ time is the same as the ‘OFF’ time the

appliance will ignore the program.

The Advance Function

When in ‘AUTO’ MODE, if the ‘+’ button is pressed for

longer than 2 seconds the programme will ADVANCE to the

next setting programmed and will only revert back to the

program when the subsequent programme time is reached.

When the ‘ADVANCE’ function is running the ‘ADVANCE’

segment will be displayed on the LCD screen. If the ‘-’ button

is pressed when the ‘ADVANCE’ programme is running the

‘ADVANCE’ feature will be automatically cancelled and the

programme will run as normal.

Note - Timer Memory Back Up Batteries - Once the heater

has been left plugged in with the socket switched on for at

least 72 hours the timer’s memory back up batteries will

be fully charged.

Once the timer batteries are fully charged, if there is a power

cut or if the heater is disconnected from the mains for less

than six months, then the timer will continue to keep time

& the settings in the memory will remain intact.

If however the timer back up batteries have not been

charged fully, or if the heater is deprived of power for

longer than six months, then the time and the programme

settings are likely to be lost and you may therefore need to

reset the time and the programme before using the AUTO

MODE again.

(See Electronic Climate Control Details

overleaf) ...

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex Cadiz Eco CDE3TIE Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info