Bedienungsanleitung Dimplex HPL 12S-TURW (Seite 35 von 84) (Deutsch, Englisch, Französisch)

798232

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

www.glendimplex.de 452168.66.05a · FD 0104 EN-11

HPL 9S-TU(R)W - HPL 18S-TU(R)W English

for domestic hot water inches 1“ AG 1“ AG 1“ AG

for circulation pipe inches 3/4“ IG 3/4“ IG 3/4“ IG

for expansion vessel inches 1“ AG/FL 1“ AG/FL 1“ AG/FL

6.12 Anode diameter HWK mm 33 33 33

6.13 Anode length HWK mm 690 690 690

6.14 Anode connection thread HWK inches 1 1/4“ IG 1 1/4“ IG 1 1/4“ IG

6.15 Weight of the transport unit(s)

incl. packaging HWK kg 210 210 210

7 Electrical connection

7.1 Supply voltage / fusing / RCD type 3~/N/PE 400 V (50 Hz) /

C10 A / A

3~/N/PE 400 V (50 Hz) /

C10 A / A

3~/N/PE 400 V (50 Hz) /

C13 A / B

7.2 Control voltage / fusing by WPM 1~/N/PE 230 V (50 Hz) /

4 AT

1~/N/PE 230 V (50 Hz) /

4 AT

1~/N/PE 230 V (50 Hz) /

4 AT

7.3 Degree of protection according to EN 60529 IP 24 IP 24 IP 24

7.4 Starting current limiter Soft starter Soft starter Soft starter

7.5 Rotary field monitoring Yes Yes Yes

7.6 Starting current with soft starter A 21 19 21

7.7 Nominal power consumption A2/W35/ max. power consumption 4 kW 1.7 / 3.3 2.38 / 4.0 3.24 / 6.8

7.8 Nominal current A2 /W35 / cos  A / --- 3.1 / 0.8 4.3 / 0.8 5.9 / 0.8

7.9 Power consumption of compressor protection

(per compressor) W / ---

70 / thermostatically

controlled

70 / thermostatically

controlled

70 / thermostatically

controlled

7.10 Power consumption of fan W up to 100 up to 150 up to 200

7.11 Control voltage, fusing HWK

7.12 Supply voltage / fusing

(∑ P = 3.5 kW) HWK

1~ / N / PE 230V (50Hz) /

B63A

1~ / N / PE 230V (50Hz) /

B63A

1~ / N / PE 230V (50Hz) /

B63A

HWK 3~ / N / PE 400V (50Hz) /

B25A

3~ / N / PE 400V (50Hz) /

B25A

3~ / N / PE 400V (50Hz) /

B25A

Supply voltage / fusing

(∑ P = 3.5 kW) HWK

1~ / N / PE 230V (50Hz) /

B16A

1~ / N / PE 230V (50Hz) /

B16A

1~ / N / PE 230V (50Hz) /

B16A

3~ / N / PE 400V (50Hz) /

B10A

3~ / N / PE 400V (50Hz) /

B10A

3~ / N / PE 400V (50Hz) /

B10A

8 Complies with the European safety regulations 11 11 11

9 Additional model features

9.1 Type of defrosting Reverse circulation Reverse circulation Reverse circulation

9.2 Frost protection, condensate tray /

Water in device protected against freezing12 Yes Yes Yes

9.3 Maximum operating pressure (heat sink) bar 3.0 3.0 3.0

9.4 Energy efficiency class / energy efficiency (low temperature) A++ / 177 % A++ / 173 % A++ / 168 %

9.5 Energy efficiency class / energy efficiency (mean temperature) A++ / 127 % A++ / 128 % A++ / 133 %

10 Heat output COP 4

10.1 Heat output / COP EN 14511 EN 14511 EN 14511

Performance level 121212

at A-7 / W35 kW / --- 5.5 / 3.3 --- 7.2 / 3.2 --- 5.6 / 3.3 10.5 / 3.2

at A2 / W35 kW / --- 7.2 / 4.3 --- 9.5 /

4.1(4.3)13 --- 7.3 / 4.3 12.3 / 3.9

(4.0)13

at A7 / W35 kW / --- 8.4 / 4.9 --- 11.3 / 4.8 --- 8.4 / 5.0

at A7 / W45 kW / --- 8.2 / 3.8 --- 10.8 / 3.9 --- 8.1 / 3.9

at A7 / W55 kW / --- 8.0 / 3.0 --- 10.0 / 3.1 --- 7.7 / 3.2

at A10 / W35 kW / --- 8.9 / 5.3 --- 12.0 / 5.1 --- 8.8 / 5.4

1. For air temperatures between -22°C and -5°C, flow temperature increasing from 45? t

2. Operation with 2 compressors

3. Operation with 1 comressor

4. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, other parameters, in

particular the defrosting capacity and regulation, should also be taken into consideration. These figures are only achieved with clean heat exchangers. Instructions for care,

commissioning and operation can be found in the relevant sections of the installation and operation instructions. The specified values have the following meaning, e.g. A7/

W35: outside air temperature 7 °C and heating water flow temperature 35 °C.

5. Standard nominal flow only possible with an electronically controlled circulating pump with actuation via heat pump manager.

6. The heat output and COP is reduced by approx. 5 % in lower operation

7. When the optional weather protection hood (accessory) is used. the sound pressure level in outlet direction is reduced by 3 dB(A).

8. The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.

9. condition as delivered 6 kw

10.Note that additional space is required for pipe connections, operation and maintenance.

11.See CE declaration of conformity

12.The heat circulating pump and the heat pump manager must always be ready for operation.

13.The coefficient of performance (COP) in partial load operation can be increased by selecting "energy-optimised heating operation" (natural defrosting)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex HPL 12S-TURW Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info