Bedienungsanleitung Dimplex LA60S TUR (Seite 11 von 24) (Englisch)

798431

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

www.glendimplex.de 452163.66.79-EN · FD 0103 EN-9

LA 60S-TUR English

9 Cleaning / maintenance

9.1 Maintenance

To protect the paintwork, avoid leaning anything against the

device or putting objects on the device. External heat pump

parts can be wiped with a damp cloth and domestic cleaner.

NOTE

ºººº

Never use cleaning agents containing sand, soda, acid or

chloride as these can damage the surfaces.

To prevent faults due to sediment in the heat exchanger of the

heat pump, ensure that the heat exchanger in the heating sys-

tem cannot be contaminated. In the event that operating mal-

functions due to contamination still occur, the system should

be cleaned as described below.

9.2 Cleaning the heating system

CAUTION!

The installed dirt traps must be cleaned at regular intervals.

The maintenance intervals should be defined according to the

degree of soiling in the system. The filter insert should also be

cleaned.

For cleaning, the heating circuit must be made pressureless in

the vicinity of the dirt trap, the filter compartment unscrewed,

and the filter insert removed and cleaned. Assembly carried out

in reverse order requires attention to correct assembly of the

screen inserts and tightness of the screw joints.

The ingress of oxygen into the heating water circuit may result

in the formation of oxidation products (rust), particularly if steel

components are used. They enter the heating system via the

valves, the circulating pumps and/or plastic pipes. It is there-

fore essential - in particular with respect to the entire pipework

- that only diffusion-resistant materials are used.

NOTE

ºººº

We recommend the installation of a suitable corrosion

protection system to prevent the formation of deposits (e.g.

rust) in the condenser of the heat pump. We recommend

equipping diffusion-open heating systems with an

electrophysical anti-corrosion system (e.g. ELYSATOR

system).

Residue from lubricants and sealants may also contaminate the

heating water.

In the case of severe contamination leading to a reduction in

the performance of the liquefier in the heat pump, the system

must be cleaned by a heating technician.

Based on current knowledge, we recommend carrying out the

cleaning with a 5 % phosphor acid or, if more frequent cleaning

is required, with a 5 % formic acid.

In either case, the cleaning fluid should be at room tempera-

ture. We recommend flushing the heat exchanger in the direc-

tion opposite to the normal flow direction.

To prevent acidic cleaning agents from entering the heating

system circuit, we recommend connecting the flushing device

directly to the flow and return of the liquefier of the heat pump.

It is then important that the system be thoroughly flushed using

appropriate neutralising agents to prevent any damage from

being caused by cleaning agent residue remaining in the sys-

tem.

Acids must be used with care and the regulations of the em-

ployers’ liability insurance associations must be adhered to.

The manufacturer's instructions regarding cleaning agent must

be complied with at all times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex LA60S TUR Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex LA60S TUR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info