Bedienungsanleitung Dimplex LI 11MER (Seite 3 von 24) (Englisch)

520408

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

E-2

English

1 Please Read

Immediately

1.1 Important Information:

ATTENTION!

The device is not suitable for operation with a frequency converter.

ATTENTION!

When transporting the heat pump, ensure that it is not tilted more than

45° (in any direction).

ATTENTION!

The heat pump and transport pallet are only joined by the packing film.

ATTENTION!

Do not restrict or block the area around the air intake or outlet.

ATTENTION!

Only operate the heat pump with the air ducts connected.

ATTENTION!

Never use cleaning agents containing sand, soda, acid or chloride as

these can damage the surfaces.

ATTENTION!

We recommend the installation of a suitable corrosion protection system

to prevent the formation of deposits (e.g. rust) in the condenser of the

heat pump.

ATTENTION!

Before opening the device, ensure that all circuits are isolated from the

power supply.

ATTENTION!

Any work on the heat pump may only be performed by authorised and

qualified after-sales service technicians.

1.2 Legal Regulations and

Directives

The construction and design of the heat pump complies with all

relevant EU directives, DIN/VDE regulations (see CE declaration

of conformity).

When connecting the heat pump to the power supply, the rele-

vant VDE, EN and IEC standards are to be fulfilled. Any further

connection requirements stipulated by local utility companies

must also be observed.

When connecting the heating and/or cooling system, all applica-

ble regulations must also be adhered to.

Persons, especially children, who are not capable of operating

the device safely due to their physical, sensory or mental abilities

or their inexperience or lack of knowledge, must not operate this

device without supervision or instruction by the person in charge.

Children must be supervised to ensure that they do not play with

the device.

1.3 Energy-Efficient Use of the

Heat Pump

With the purchase of this heat pump you are helping to protect

the environment. A prerequisite for energy-efficient operation is

the correct design of the heat source system and heating (radia-

tors and circulation pump) or cooling system.

It is particularly important for the efficient heating operation of a

heat pump to keep the temperature difference between the

heating water and the heat source as small as possible. For this

reason, it is advisable to design the heat source and heating sys-

tem very carefully. A temperature difference of approx. one

Kelvin increases the power consumption by around 2.5 %.

When designing the heating system, it should be borne in mind

that special consumers such as e.g. hot water preparation should

also be considered and dimensioned for low temperatures. Un-

derfloor heating systems (panel heating) are optimally suited

for heat pump use on account of the low flow temperatures

(30 °C to 40 °C).

It is important to ensure that the heat exchangers are not con-

taminated during operation because this increases the tempera-

ture difference, in turn reducing the COP.

Correct adjustment of the heat pump controller is also important

for energy-efficient use of the heat pump. Further information can

be found in the heat pump controller's operating instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex LI 11MER Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex LI 11MER

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info