Bedienungsanleitung Dimplex LI 11TE (Seite 19 von 60) (Deutsch, Englisch, Französisch)

520409

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

www.dimplex.de EN-3

English

3.1

2 Purpose of the Heat

Pump

2.1 Application

The air-to-water heat pump is to be used exclusively for the heat-

ing of heating water. It can be used in newly built or previously

existing heating systems.

The heat pump is suitable for mono energy and bivalent opera-

tion down to an external temperature of -25 °C.

Proper defrosting of the evaporator is guaranteed by maintaining

a heating water return flow temperature of more than 18 °C dur-

ing continuous operation.

The heat pump is not designed for the increased heat consump-

tion required when a building is being dried out. The additional

heat consumption should be met using special devices provided

by the customer. If a building is to be dried out in autumn or win-

ter, we recommend installing an additional heating element

(available as an accessory).

NOTE

The device is not suitable for operation with a frequency converter.

2.2 Operating Principle

Outside air is drawn in by the ventilator and fed via the evapora-

tor (heat exchanger). The evaporator cools the air, i.e. it extracts

heat from it. This extracted heat is then transferred to the working

medium (refrigerant) in the evaporator.

The heat is “pumped” to a higher temperature level by increasing

its pressure with the aid of an electrically driven compressor. It is

then transferred to the heating water using the liquifier (heat ex-

changer).

Electrical energy is used to raise the temperature of the heat in

the environment to a higher level. Because the energy extracted

from the air is transferred to the heating water, this type of device

is called an air-to-water heat pump.

The air-to-water heat pump consists of the main components

evaporator, ventilator and expansion valve, as well as the low-

noise compressor, liquifier and electrical control system.

At low ambient temperatures, humidity accumulates on the evap-

orator in the form of frost, reducing the transfer of heat. Uneven

accumulation during this process does not indicate a fault. The

evaporator is defrosted automatically by the heat pump as re-

quired. Steam may be emitted from the air outlet depending on

the atmospheric conditions.

3 Scope of Delivery

3.1 Basic Device

The heat pump is of compact design and is supplied complete

with the components listed below.

The refrigerant circuit is hermetically sealed. It contains the

Kyoto protocol approved refrigerant R404A with a GWP value of

3260. It is CFC-free, does not deplete ozone and is non-flamma-

ble.

1) Evaporator

2) Check valve

3) Ventilator

4) Switch box

5) Pressure switches

6) Filter dryer

7) Liquifier

8) Expansion valve

9) Compressor

 

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex LI 11TE Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex LI 11TE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info