Bedienungsanleitung Dimplex LI 16TE (Seite 18 von 60) (Deutsch, Englisch, Französisch)

520410

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

EN-2

English

1 Please Read

Immediately

1.1 Important Information:

ATTENTION!

When operating or maintaining a heat pump, the legal requirements of the

country where the heat pump is operated apply. Depending on the

refrigerant quantity, the heat pump must be inspected for leaks at regular

intervals by a certified technician, and these inspections must be

recorded.

ATTENTION!

If the heat pump or circulating pump is controlled externally, an

additional flow rate switch is required to prevent the compressor from

being switched on when there is no volume flow.

ATTENTION!

When transporting the heat pump, ensure that it is not tilted more than

45° (in any direction).

ATTENTION!

The heat pump and transport pallet are only joined by the packing film.

ATTENTION!

The transport securing device is to be removed prior to commissioning.

ATTENTION!

Do not restrict or block the area around the air intake or outlet.

ATTENTION!

Only operate the heat pump with the air ducts connected.

ATTENTION!

Ensure the rotary field is clockwise when connecting the mains cables (if

the rotary field is not clockwise, the heat pump will not work properly, is

very loud and may cause damage to the compressor).

ATTENTION!

Operating the heat pump at low system temperatures may cause the heat

pump to break down completely. After a prolonged power failure, the

commissioning procedure detailed above must be followed.

ATTENTION!

Before opening the device, ensure that all circuits are isolated from the

power supply.

ATTENTION!

Any work on the heat pump may only be performed by authorised and

qualified after-sales service technicians.

1.2 Intended Use

This device is only intended for use as specified by the manufac-

turer. Any other use beyond that intended by the manufacturer is

prohibited. This requires the user to abide by the manufacturers

product information. Please refrain from tampering with or alter-

ing the device.

1.3 Legal Regulations and

Directives

This heat pump is designed for use in a domestic environment

according to Article 1, Paragraph 2 k) of EC directive 2006/42/EC

(machinery directive) and is thus subject to the requirements of

EC directive 2006/95/EC (low-voltage directive). It is thus also in-

tended for use by non-professionals for heating shops, offices

and other similar working environments, in agricultural establish-

ments and in hotels, guest houses and similar / other residential

buildings.

The construction and design of the heat pump complies with all

relevant EU directives, DIN/VDE regulations (see CE declaration

of conformity).

When connecting the heat pump to the power supply, the rele-

vant VDE, EN and IEC standards are to be fulfilled. Any further

connection requirements stipulated by local utility companies

must also be observed.

When connecting the heating system, all applicable regulations

must also be adhered to.

Persons, especially children, who are not capable of operating

the device safely due to their physical, sensory or mental abilities

or their inexperience or lack of knowledge, must not operate this

device without supervision or instruction by the person in charge.

Children must be supervised to ensure that they do not play with

the device.

ATTENTION!

When operating or maintaining a heat pump, the legal requirements of the

country where the heat pump is operated apply. Depending on the

refrigerant quantity, the heat pump must be inspected for leaks at regular

intervals by a certified technician, and these inspections must be

recorded.

1.4 Energy-Efficient Use of the

Heat Pump

With the purchase of this heat pump you are helping to protect

the environment. A prerequisite for energy-efficient operation is

the correct design of the heat source system and heating system

(radiators and circulation pump).

It is particularly important for the efficiency of a heat pump to

keep the temperature difference between heating water and heat

source as small as possible. For this reason, it is advisable to de-

sign the heat source and heating system very carefully. A tem-

perature difference of approx. one Kelvin increases the

power consumption by around 2.5 %. When designing the

heating system, it should be borne in mind that special consum-

ers such as e.g. hot water preparation should also be considered

and dimensioned for low temperatures. Underfloor heating

systems (panel heating) are optimally suited for heat pump use

on account of the low flow temperatures (30 °C to 40 °C).

It is important to ensure that the heat exchangers are not con-

taminated during operation because this increases the tempera-

ture difference, in turn reducing the COP.

Correct adjustment of the haet pump manager is also important

for energy-efficient use of the heat pump. Further information can

be found in the haet pump manager's operating instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex LI 16TE Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex LI 16TE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info