Bedienungsanleitung Dimplex LIK 8ME (Seite 6 von 22) (Englisch)

798210

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

E-5

English

5Set-UP

5.1 General Information

The heat pump is designed for installation in a corner. Other in-

stallation locations are also possible in combination with an air

duct (available as an accessory) on the air outlet side.

The unit must be installed indoors on a level, smooth and hori-

zontal surface. The entire base of the frame should lie directly on

the floor to ensure a good soundproof seal. If this is not the case,

additional sound insulation measures may be necessary.

The heat pump must be installed so that maintenance work can

be carried out without being hindered. This can be ensured by

maintaining a clearance of 1 m in front and to the left of the heat

pump. The side panel assemblies must not be covered by

connecting pipes.

Never install the device in rooms subject to high humidity. Con-

densation can form on the heat pump and air circuit if the humid-

ity exceeds 50 % and the external temperature is below 0 °C.

If the heat pump is installed on an upper storey, the load-bearing

capacity of the ceiling should be checked. On account of the

acoustics, measures for isolating possible vibrations should also

be very carefully planned in advance as well. Installation on a

wooden floor is not recommended.

5.2 Condensed Water Pipe

Condensed water that forms during operation must be drained

off frost-free. The heat pump must be mounted on a level plane

to guarantee proper drainage. The condensed water pipe must

have a minimum diameter of 50 mm and should be fed frost-free

into a sewer. Condensate should not be discharged directly into

clearing tanks and cesspits because the aggressive vapours

could destroy the evaporator.

5.3 Sound

To prevent solid-borne sound from being transmitted to the heat-

ing system, a vibration-damped connection should be used for

connecting the heat pump with the heating system (install the

supplied hose connections free of strain).

Installed air ducts should be sound-isolated from the heat pump

to prevent the transmission of solid-borne sound to the ducts.

If both air openings are connected directly to a wall opening, the

ventilator terminals can be reversed from a delta to a star con-

nection (see information in the ventilator terminal box).

6 Installation

6.1 General Information

The following connections need to be established on the heat

pump:

Fresh and exhaust air

Flow and return flow of the heating system

Condensate outflow

Outflow for the pressure relief valve

Power supply

6.2 Air Connection

ATTENTION!

Do not restrict or block the area around the air intake or outlet.

The air intake opening of the device is solely designed for direct

connection to a wall opening. The wall opening can be provided

with air duct and sealing collar for this purpose. See the illustra-

tion in the appendix under Installation Dimensions.

The glass fibre reinforced concrete air ducts offered as accesso-

ries are moisture-resistant and diffusion-free.

The sealing collar is used to seal the air ducts on the heat pump.

The air ducts are not screwed directly onto the heat pump. Only

the rubber seal comes into direct contact with the heat pump

when the system is installed correctly. This guarantees easy as-

sembly and disassembly of the heat pump and also ensures that

solid-borne sound is well insulated.

It must also be ensured that the interior side of the wall opening

is lined with thermal insulation to prevent the wall from becoming

cold and to prevent moisture from penetrating the wall. The en-

closed fixing accessories can be used for attachment to the wall.

P

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex LIK 8ME Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex LIK 8ME

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info