Bedienungsanleitung Dimplex LIK 8TE (Seite 22 von 60) (Deutsch, Englisch, Französisch)

520415

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

EN-6

English

6.2

6.2 Condensed Water Pipe

Condensed water that forms during operation must be drained

off frost-free. To ensure proper drainage, the heat pump must be

mounted horizontally. The condensate pipe must have a mini-

mum diameter of 50 mm and must be fed into a sewer in such a

way that it is safe from frost. Do not discharge the condensate di-

rectly into clearing tanks or cesspits, as aggressive vapours or a

condensed water pipe which has not been laid in a frost-free

manner could destroy the evaporator.

6.3 Sound

To prevent solid-borne sound from being transmitted to the heat-

ing system, a vibration-damped connection should be used for

connecting the heat pump with the heating system (install the

supplied hose connections free of strain).

Installed air ducts should be sound-isolated from the heat pump

to prevent the transmission of solid-borne sound to the ducts.

If both air openings are connected directly to a wall opening, the

ventilator terminals can be reversed from a delta to a star con-

nection (see information in the ventilator terminal box).

7 Installation

7.1 General Information

The following connections need to be established on the heat

pump:

Fresh and exhaust air

Flow and return flow of the heating system

Condensate outflow

Outflow for the pressure relief valve

Temperature sensor

Power supply

7.2 Air Connection

ATTENTION!

Do not restrict or block the area around the air intake or outlet.

The air intake opening of the device is solely designed for direct

connection to a wall opening. The wall opening can be provided

with air duct and sealing collar for this purpose. See the illustra-

tion in the appendix under Installation Dimensions.

The glass fibre reinforced concrete air ducts offered as accesso-

ries are moisture-resistant and diffusion-free.

The sealing collar is used to seal the air ducts on the heat pump.

The air ducts are not screwed directly onto the heat pump. Only

the rubber seal comes into direct contact with the heat pump

when the system is installed correctly. This guarantees easy as-

sembly and disassembly of the heat pump and also ensures that

solid-borne sound is well insulated.

It must also be ensured that the interior side of the wall opening

is lined with thermal insulation to prevent the wall from becoming

cold and to prevent moisture from penetrating the wall. The en-

closed fixing accessories can be used for attachment to the wall.

The air outlet can be optionally mounted directly to a wall open-

ing or to a longer duct (available as an accessory). Use the same

mounting procedure as for the air inlet.

If a flange-mounted air duct is used on the air outlet side, it is se-

cured with 4 M8 x 16 hexagon bolts in the threaded holes pro-

vided. When doing this, ensure that the air duct stubs only touch

the insulation. There should be no contact with the external

sheeting.

[

0[

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex LIK 8TE Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex LIK 8TE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info