Bedienungsanleitung Dimplex OFC2400 (Seite 3 von 4) (Englisch)

798097

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Model Description Watts

OFC1200 5 Fin, Thermostat, 2 Heat Settings, Neon 1200

OFC1200TI 5 Fin, Thermostat, 2 Heat Settings, Neon, Electronic Timer 1200

OFC1500 7 Fin, Thermostat, 2 Heat Settings, Neon 1500

OFC1500TI 7 Fin, Thermostat, 2 Heat Settings, Neon, Electronic Timer 1500

OFC1500TIF 7 Fin, Thermostat, 2 Heat Settings, Neon, Electronic Timer, Turbo 1500

OFC2000 9 Fin, Thermostat, 2 Heat Settings, Neon 2000

OFC2000TI 9 Fin, Thermostat, 2 Heat Settings, Neon, Electronic Timer 2000

OFC2400 11 Fin, Thermostat, 2 Heat Settings, Neon 2400

OFC2400TI 11 Fin, Thermostat, 2 Heat Settings, Neon, Electronic Timer 2400

OFC2400TIF 11 Fin, Thermostat, 2 Heat Settings, Neon, Electronic Timer, Turbo 2400

Important Safety Advice

IMPORTANT: If the appliance is damaged,

check immediately with the supplier before

installation and operation.

This appliance can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience or knowledge if they

have been given supervision or instruction

concerning the use of the appliance in a safe

way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be

made by children without supervision.

Children of less than 3 years should be kept

away unless continuously supervised. Children

aged from 3 years and less than 8 years shall

only switch on/off the appliance provided that

it has been placed or installed in its intended

normal operating position and they have been

given supervision or instruction concerning

the use of the appliance in a safe way and

understand the hazards involved. Children

aged from 3 years and less than 8 years shall

not plug in, regulate and clean the appliance

or perform user maintenance.

CAUTION: Some parts of this product can

become very hot and cause burns. Particular

attention has to be given where children and

vulnerable people are present.

This heater carries the warning symbol

indicating that it must not be covered.

DO NOT use the heater where gas, petrol, paint

or other inammable goods are used or stored.

DO NOT use the heater in the immediate

surroundings of a bath, a shower or a swimming

pool.

WARNING: This heater must not be used in

a bathroom.

DO NOT place the heater directly below a xed

socket outlet.

WARNING: In order to avoid overheating, do

not cover the heater.

We recommend that you open a window to

ventilate the room when using the heater for

the rst time.

DO NOT use this heater if it develops a leak.

Unplug the heater and contact your supplier

or service agent.

IMPORTANT: If the mains lead of this appliance

is damaged, it must be replaced by the

manufacturer or its service agent or a similarly

qualied person in order to avoid a hazard.

Unplug the heater when not required for long

periods.

General

The radiator is designed for operation on an AC electricity supply, and is

suitable for use in domestic dwellings and similar indoor locations.

Always ensure that the appliance is stood on a rm, level base near to, but

not directly beneath, a suitable xed socket outlet.

The radiator is tted with castors and a handle for ease of movement. Selector

switches provide a choice of heat output and an adjustable thermostat enables

the room temperature to be controlled accordingly. It is supplied with a cord

and plug ready for use. The supply cord should be uncoiled before use (see

‘Storage’). DO NOT pull the radiator along by the mains lead.

Important: The radiator must only be operated with the wheels and castors

tted and in the upright position as shown in Fig.1 and Fig.3B.

Warning: The heater complies with stringent safety standards but to ensure

efcient operation surfaces of the heater will become hot and contact with

these areas should be avoided, particularly between the ns on the top and

sides. The control panel area is designed to be at a far lower temperature to

allow the safe operation of the controls at any time.

Electrical

WARNING: THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC~ supply only and the voltage marked on

the heater must correspond to the supply voltage. Do not switch the appliance

on until properly installed. Please read all the safety warnings and operating

instructions before use. If you use this heater in conjunction with a thermal

control, programme controller, timer or any other device which switches the

heater on automatically observe all safety warnings at all times.

Fitting the castors

The castors can only be tted between the outer ns (as shown in Fig. 2).

Turn the radiator upside down on a carpet or other soft surface to avoid

damage.

WARNING: The radiator is heavy, ensure that it is supported to prevent it

from toppling. Ask a second person to help with this if necessary. Locate

the wire clamps and remove the winged nuts (see ‘C’) in Fig.3A. Insert the

non-threaded end of the wire clamp ‘A’ into one of the holes in the castor

plate ‘B’ as shown in Fig.3A, at the same time tilting the opposite end of the

plate slightly. Lower the castor plate and insert the threaded end of the clamp

through the ns and over the boss and into the other hole in the castor plate.

Place the winged nut ‘C’ on the thread and tighten it securely.

Repeat the process for the other castor bracket onto the last n.

Note: The 9 and 11 n column radiator models - use straight castor brackets

and must be tted as shown in Fig.2.

Lift the radiator clear of the oor, then turn it back upright and stand it on its

castors as shown in Fig.1 and Fig.3B. It is now ready for use.

Positioning the Heater

Select the position for the radiator ensuring there is clearance from any

furniture and ttings of at least 300mm above the heater and 150mm each

side. The radiator should only be operated on a at stable surface.

Operation

Important: Objects or clothing must not be placed on this heater. Before using

the heater ensure that all warnings and instructions have been read carefully.

To bring the heater into use plug it in. Neon indicating lights located at the

controls area will cycle on and glow when the appliance is heating.

Controls

Thermostat (see Fig.4)

The Thermostat (see Fig.4) controls the heat output according to the room

temperature. This ensures that the heater will not produce heat unnecessarily

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Dimplex Oil lled Column Radiators

Models: OFC1200, OFC1200TI, OFC1500, OFC1500TI, OFC 1500TIF OFC2000, OFC2000TI, OFC2400, OFC2400TI & OFC2400TIF

Dimplex OFC2400 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info