Bedienungsanleitung Dimplex SIH 20TE (Seite 19 von 56) (Deutsch, Englisch, Französisch)

520399

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

www.gdts.one 452234.66.77 · FD 9912 EN-3

SIH 20TE English

1.3 Legal Provisions and Guidelines

This heat pump is designed for use in a domestic environment

according to Article 1, Paragraph 2 k) of EC directive 2006/42/

EC (machinery directive) and is thus subject to the require-

ments of EU directive 2014/35/EU (low-voltage directive). It is

thus also intended for use by non-professionals for heating

shops, offices and other similar working environments, in agri-

cultural establishments and in hotels, guest houses and similar

/ other residential buildings.

This heat pump conforms to all relevant DIN/VDE regulations

and EU directives. For details refer to the EC Declaration of

Conformity in the appendix.

The electrical connection of the heat pump must be performed

according to and conforming with all relevant VDE, EN and IEC

standards. Beyond that, the connection requirements of the

local utility companies have to be observed.

The heat pump is to be connected to the heat source and heat

distribution systems in accord-ance with all applicable provi-

sions.

This unit can be used by children aged 8 and over and by per-

sons with limited physical, sensory or mental aptitude or lack of

experience and/or knowledge, providing they are supervised or

have been instructed in the safe use of the unit and understand

the associated potential dangers.

Children must not play with the device. Cleaning and user

maintenance must not be carried out by children without su-

pervision.

ATTENTION!

Any work on the heat pump may only be performed by an

authorised and qualified customer service.

ATTENTION!

When operating or maintaining a heat pump, the legal

requirements of the country where the heat pump is operated

apply. Depending on the refrigerant quantity, the heat pump

must be inspected for leaks at regular intervals by a certified

technician, and these inspections must be recorded.

More information can be found in the accompanying log book.

1.4 Energy-Efficient Use of the Heat

Pump

By operating this heat pump you contribute to the protection of

our environment. A prerequisite for an efficient operation is the

proper design and sizing of the heating system and the heat

source system. In particular, it is important to keep water flow

temperatures as low as possible. All energy consumers con-

nected should therefore be suitable for low flow temperatures.

A 1 K higher heating water temperature corresponds to an in-

crease in power consumption of approx. 2.5 %. Low-tempera-

ture heating systems with flow temperatures between 30 °C

and 50 °C are optimally suited for energy-efficient operation.

2 Purpose of the heat pump

2.1 Application

The brine-to-water heat pump is to be used exclusively for the

heating of heating water. It can be used in new or previously ex-

isting heating systems. The mixture of water and frost protec-

tion (brine) acts as a heat transfer medium in the heat source

system. Ground probes, ground heat collectors or similar sys-

tems can be used as heat source systems.

2.2 Principle of Operation

The heat generated by the sun, wind and rain is stored in the

ground. This heat stored in the ground is collected at low tem-

perature by the brine circulating in the ground collector, ground

coil or similar device.

A circulating pump then conveys the warmed brine to the evap-

orator of the heat pump. There, the heat is given off to the re-

frigerant in the refrigeration cycle. When so doing, the brine

cools so that it can again take up heat energy in the brine cir-

cuit.

The refrigerant is drawn in by the electrically driven compres-

sor, is compressed and "pumped" to a higher temperature

level. The electrical power needed to run the compressor is not

lost in this process, but most of the generated heat is trans-

ferred to the refrigerant.

Subsequently, the refrigerant is passed through the condenser

where it transfers its heat energy to the heating water. Based on

the thermostat setting, the heating water is thus heated to up to

70 °C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex SIH 20TE Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex SIH 20TE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info