Bedienungsanleitung Dimplex VFMi 40C (Seite 12 von 20) (Deutsch, Englisch)

520490

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Manual Charging (Manual Operation)

If the charging of the device is to be controlled manually, the

charging knob must be placed on the axis of the adjuster.

Remove the cap at the front panel of the storage heater.

The thermal energy to be stored can be set via the knob.

On extremely cold days choose setting III (right-hand stop),

with higher external temperatures choose a lower setting.

No charging takes place at the left-hand stop.

Room Temperature Control

The transfer of the thermal energy stored in the storage

heater is automatically controlled via the room temperature

controller. The desired temperature, e.g. 20° C is set on a

scale. Room temperature controllers can be either wall-

mounted or integrated into the storage heater.

During the night or when a room is not used, the temperature

should be lowered by roughly 4° C.

A further lowering of the temperature is not recommended,

as this causes excessive cooling of the room's walls. In case

of changes of the temperature settings, it will take a while for

the room temperature to be reached. Therefore, the

temperature lowering must be cancelled some time (at least

one hour) before the room is to be used again. With many

controllers this can be carried out automatically with a

setback thermostat.

During longer absences frost protection must be taken into

consideration.

Maintenance

Occasional vacuum-cleaning in the area of the air outlet grid

and the lower slot rows of the right side panel is

recommended.

As part of the maintenance cycle, it is recommended to test

the correct functioning of the controlling and regulating

devices. This test must be carried out every 10 years at the

latest to prevent unnecessary energy consumption.

Temperature Management

Room Too Cold

• Check the breaker/fuses for the storage heaters in the

supply panel and, if necessary, replace or reactivate the

breaker/fuses.

• Charging adjuster at the storage heater set too low

(manual charging only). Correct setting.

• Incorrect room thermostat setting. Correct setting.

• The windows and doors are open and/or the neighbouring

rooms are not heated.

• Incorrect setting of the central charge control.

Correction according to the operating instructions of the

charge control.

Room Too Hot

• Check the breaker/fuse for the charge control in the

supply panel and, if necessary, replace or reactivate the

breaker/fuse.

• Charging adjuster at the storage heater set too high

(manual charging only). Correct setting.

• Incorrect room thermostat setting. Correct setting.

• Incorrect central charge control setting:

Correction according to the operating instructions of the

charge control.

If you cannot correct the fault, please contact an electrician

or your nearest after-sales service provider.

To process your order, we require the model number (E-No.)

and the data code (FD). This information is listed on the

rating plate.

Rating plate

Maximum charging No charging

Operating Instructions for Users English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex VFMi 40C Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex VFMi 40C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info