Bedienungsanleitung Dimplex WI 10TU (Seite 20 von 72) (Deutsch, Englisch, Französisch)

520403

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

EN-2 452235.66.21a · FD 0106 www.glendimplex.de

English WI 10TU - WI 22TU

1Safety notes

1.1 Symbols and markings

Particularly important information in these instructions is

marked with CAUTION! and NOTE.

CAUTION!

Immediate danger to life or danger of severe personal injury or

significant damage to property.

NOTE

ºººº

Risk of damage to property or minor personal injury or

important information with no further risk of personal injury

or damage to property.

1.2 Intended Use

This device is only intended for use as specified by the manu-

facturer. Any other use beyond that intended by the manufac-

turer is prohibited. This requires the user to abide by the rele-

vant project planning documents. Please refrain from

tampering with or altering the device.

1.3 Legal Regulations and

Directives

This heat pump is designed for use in a domestic environment

according to Article 1, Paragraph 2 k) of EU directive 2006/42/

EC (machinery directive) and is thus subject to the require-

ments of EU directive 2014/35/EU (low-voltage directive). It is

thus also intended for use by non-professionals for heating

shops, offices and other similar working environments, in agri-

cultural establishments and in hotels, guest houses and similar

/ other residential buildings.

This heat pump conforms to all relevant DIN/VDE regulations

and EU directives. Refer to the EC Declaration of Conformity in

the appendix for details.

The heat pump must be connected to the power supply in

compliance with all relevant VDE, EN and IEC standards. Any

further connection requirements stipulated by local utility com-

panies must also be observed.

The heat pump is to be connected to the heat source system

and the heating system in accordance with all applicable regu-

lations.

This unit can be used by children aged 8 and over and by per-

sons with limited physical, sensory or mental aptitude or lack of

experience and/or knowledge, providing they are supervised or

have been instructed in the safe use of the unit and understand

the associated potential dangers.

Children must not play with the device. Cleaning and user

maintenance must not be carried out by children without su-

pervision.

CAUTION!

When operating or maintaining a heat pump, the legal

requirements of the country where the heat pump is operated

apply. Depending on the refrigerant quantity, the heat pump

must be inspected for leaks at regular intervals by a certified

technician, and these inspections must be recorded.

More information can be found in the accompanying log book.

1.4 Energy-Efficient Use of the Heat

Pump

By operating this heat pump you are helping to protect our en-

vironment. Both the heating system and the heat source must

be properly designed and dimensioned to ensure efficient op-

eration. It is particularly important to keep water flow tempera-

tures as low as possible. All connected energy consumers

should therefore be suitable for low flow temperatures. Raising

the heating water temperature by 1 K corresponds to an in-

crease in energy consumption of approx.

2.5 %. Low-temperature heating systems with flow tempera-

tures between 30 °C and 50 °C are particularly well-suited for

energy-efficient operation.

2 Purpose of the Heat Pump

2.1 Application

The water-to-water heat pump is to be used exclusively for the

heating of heating water. It can be used in newly built or previ-

ously existing heating systems. Water is used as the heat car-

rier. It can be supplied by wells or other water systems.

In order to eliminate the risk of corrosion at the evaporator, the

well water must be evaluated regarding the corrosion behaviour

of metallic materials according to DIN 50930.

Details can be found in the project planning and installation

manual for heat pumps for heating purposes.

CAUTION!

The well water must comply with the required water quality

standards. (see Cap. 9.4 on pag. 9)

2.2 Operating Principle

A well pump conveys the water to the evaporator of the heat

pump. There the heat is transferred to the refrigerant in the re-

frigerating circuit.

The refrigerant is drawn in by the electrically driven compres-

sor, compressed and “pumped” to a higher temperature level.

The electrical power needed to run the compressor is not lost in

this process. Most of it is absorbed by the refrigerant as well.

Subsequently, the refrigerant is passed through the condenser

where it transfers its heat energy to the heating water.

Depending on the set operating point (thermostat setting), the

heating water is thus heated up to a max. of 62 °C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex WI 10TU Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex WI 10TU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info