3.1Heating water flow at internal pressure differential
Nominal flow according to EN14511at W10-7 / W35-30m³/h / Pa
at W10-7 / W45-40m³/h / Pa
at W10-7 / W55-47m³/h / Pa
Minimum heating water flowm³/h / Pa
2.9 / 16200
2.7 / 14100
1.6 / 5100
1.6 / 5100
3.8 / 22900
3.6 / 20700
2.2 / 7700
2.2 / 7700
3.2Cold water flow at internal pressure differential
Nominal flow according to EN14511at W10-7 / W35-30m³/h / Pa
at W10-7 / W45-40m³/h / Pa
at W10-7 / W55-47m³/h / Pa
Minimum cold water flowm³/h / Pa
4.0 / 15200
3.4 / 11200
3.3 / 10500
3.3 / 10500
5.3 / 21400
4.7 / 17100
4.0 / 12100
4.0 / 12100
3.3Sound power level according to EN 121021dB(A)
1.The specified sound levels apply if the supporting feet (available as an option) are not used. If the supporting feet are used, the level can deviate by up to 3dB(A).
4447
3.4Sound pressure level at a distance of 1 m21dB(A)
2.The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C.
The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
3235
4Dimensions, connections and weight
4.1Device dimensions 3H x W x D mm
3.Please note that additional space is required for pipe connections, operation and maintenance.
840 650 x 655840 650 x 655
4.2Weight of the transportable unit(s) incl. Packaging/fullkg160179
4.3Device connections for heating systemInches 4
4.Flat-sealing
Thread 1¼" externalThread 1¼" external
4.4Device connections for heat sourceInches 4Thread 1¼" externalThread 1½" external
4.5Refrigeran / total filling weighttype/kgR410A/3.4R410A / 4.0
4.6GWP value / CO2 equivalent--- / t2088 / 72088 / 8
4.8Lubricant / total filling quantitytype/litresPolyolester (POE)/1.2Polyolester (POE) / 1.9
4.9Volume of heating water in device Litres4.55.6
4.10Volume of heat transfer medium in device Litres2.93.3
5Electrical connection
5.1Supply voltage / fuse protection Compressor
Primary circulating pump
Joint supply
Compressor and primary circulating pump
3~/PE 400V (50Hz) / C13 A
3~/PE 400V (50Hz) / C10 A
3~/PE 400V (50Hz) / C13 A
3~/PE 400V (50Hz) / C16 A
3~/PE 400V (50Hz) / C10 A
3~/PE 400V (50Hz) / C16 A
5.2Control voltage / fuse protection1~/N/PE 230V (50Hz) / C13 A1~/N/PE 230V (50Hz) / C13 A
5.3Degree of protection according to EN 60 529IP 21IP 21
5.4Starting current with soft starterA2328
5.5Nominal power consumption W10/W35/max. consumption5kW
5.These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and
regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on maintenance, commissioning and oper-
ation can be found in the respective sections of the installation and operating instructions. The specified values, e.g. W10/W35, have the following meaning: Heat source
temperature 10°C and heating water flow temperature 35°C.
2.95 / 5.43.91/ 7.2
5.6Nominal current W10/W35/cosA / --5.32 / 0.87.06 / 0.8
5.7Power consumption of compressor protection (per compressor)Wthermostatically controlledthermostatically controlled
6Complies with the European safety regulations6
6.See CE declaration of conformity
6
7Additional model features
7.1Water in device is protected against freezing 7
7.The heat circulating pump and the heat pump manager must always be ready for operation.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Dimplex WI 10TU wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.