714583
19
Zoom out
Zoom in
Vorherige Seite
1/180
Nächste Seite
Maintaining the appliance
Emptying the dust collector
1
Press the wand release button (Fig
7
/
1
) and
remove the reach wand or the accessory from the
handheld.
2
Hold the handheld over a bin and press
the dirt release button (Fig.
11
/
1
). The dust col-
lector cover opens and the dust falls out.
Cleaning the lters
CAUTION!
Use the appliance only with both lters in place.
NOTE:
For best cleaning results, tap the lters over a bin
every 4 – 6 uses and wash them every 3 months.
1
Empty the dust collector, > “Emptying the dust
collector” on page 19.
2
Twist the lter cover anti-
clockwise to unlock (Fig.
12
) and remove the lter
cover from the handheld.
3
Pull the tab on the l-
ter (Fig.
13
/
1
) to remove it from the cover.
4
Pull
the round foam lter to remove it from the handheld.
5
Tap both lters over a bin to remove dirt.
6
Rinse
out the lters under running water (max. 40 °C).
7
Leave the lters dry for at least 24 hours before
putting them back in the appliance.
Cleaning the separator
1
Empty the dust collector, > “Emptying the dust
collector” on page 19.
2
Twist the lter cover anti-
clockwise to unlock (Fig.
12
) and remove lter cover
from the handheld.
3
Press dust collector release
button to open the dust collector.
4
To release the
separator, push from inside the dust collector and
pull out the separator to remove (Fig.
14
).
5
Pull l-
ter out of the separator (Fig.
15
).
6
Tap lter and
sepa- rator over a bin to remove dirt.
7
Rinse out the
lter under running water (max. 40 °C).
8
Let the l-
ter dry for at least 24 hours before putting it back in
the appliance.
Removing blockages

Carefully remove any hair from the turbo head
with a pair of scissors in order to remove any
blockages.

Use a broomstick or similar blunt object to remove
blockages from the reach wand.
Removing and replacing the brushbar
1
Press accessory release button and remove the
turbo head from the reach wand or the handheld
(Fig.
16
/
1
).
2
Find the letter A” on the base of the
turbo head to indicate the cover you need to remove
(Fig.
17
/
A
).
3
Use a screwdriver to unscrew the
three screws and remove the cover.
4
Slide the brushbar out of the housing (Fig.
18
).
5
Clear any blockages or replace the brushbar if it
is defective.
6
Push brushbar onto the cover, slide
both parts in the housing (Fig.
19
) and tighten the
cover with the screws.
Removing and replacing the belt
1
Press the accessory release button and remove
the turbo head from the reach wand or the hand-
held (Fig.
16
/
1
).
2
Find the letter “B” on the base of
the turbo head to indicate the cover you need to re-
move (Fig.
17
/
B
).
3
Use a screwdriver to unscrew
the three screws and remove the cover.
4
If the belt
is broken, remove it and slide a new one onto the
cogs (Fig.
20
).
5
Ret the cover and tighten it with
the screws.
Accessories
Crevice tool – 0777007 (Fig.
21
/A)
Brushbar – 0777017 (Fig.
21
/B)
Pre-motor lter – 0777001 (Fig.
21
/C)
Wall mount – 0777006 (Fig.
21
/D)
Filter set (separator + lter) – 0777002 (Fig.
21
/E)
24 V mains adapter – 0767004 (Fig.
21
/F)
32 V mains adapter – 0777004 (Fig.
21
/F)
Pet tool – 0777009 (Fig.
21
/G)
Dusting brush – 0777008 (Fig.
21
/H)
Parquet tool – 0777011 (Fig.
21
/I)
Troubleshooting
Before you contact our Dirt Devil customer service
department or send the appliance to the Dirt Devil
customer service department, you will nd a lot of
additional information in the service area of our web-
site which will help you solve problems.
www.dirtdevil.de/service
WARNING!
Switch o the appliance before you start trouble-
shooting. Never use a faulty appliance, mains
adapter or rechargeable battery.
!
EN
19
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dirt Devil DD777-3 Blade wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info