Bedienungsanleitung Dirt Devil INFINITY REBEL 53 - DD5551 (Seite 13 von 24) (Deutsch, Englisch, Französisch)

590981

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

3 Maintenance and care

3 Maintenan ce and care

3.1 Emptying and cleaning the dust container

1. Switch off the appliance ( ).

2. Pull the plug out of the plug socket.

3. Remove the dust container (Fig. 17).

4. Empty the dust container (Fig. 18).

5. At this point you can also check the components inside the dust con-

tainer:

- Main cyclone (Fig. 19 – 20),

- Filter screen (Fig. 21) and

- Reflector (Fig. 22).

6. If these 3 dust container components (Fig. 19 – 22) are dirty, clean them

under running cold or hand-warm water until all soiling has been re-

moved (Fig. 23 – 25).

7. Leave the dust container components to dry after cleaning them with

water (approx. 24 hours at room temperature).

8. Put the dust container components back in (Fig. 26 – 29).

9. Replace the dust container (Fig. 30).

You should feel and hear it clicking into place.

16 17

NOTE:

The dust container has to be emptied and cleaned regularly. Otherwise

emptying will get harder and harder or smells and bacteria might develop,

depending on what you have vacuumed up.

 Therefore, it is best to empty the dust container after each vacuuming

session.

 Empty and clean the dust container at the latest when the cleaning/

emptying display lights up (Fig. 16).

 Also empty and clean the dust container every 3 months at the latest

before storing for a long time or before sending the appliance.

CAUTION:

Switch off the appliance before removing the dust container. This will

prevent dust from damaging the appliance.

NOTE:

You can dispose of the dust container with your regular domestic trash

as long as it contains no waste materials prohibited in domestic trash.

CAUTION:

The 3 dust container components from the interior of the dust container

are washable (Fig. 23 – 25), but they are dishwasher safe.

 Also, do not use cleaning agents or brushes with hard bristles to

clean the dust container components.

 Leave the dust container components to dry after cleaning them with

water (approx. 24 hours at room temperature). Only put the components

back into the appliance when they are completely dry.

 Replace damaged or deformed filters immediately (Order informa-

tion, see ZChapter 3.4, ‘Spare parts and accessories’).

CAUTION:

The dust container cannot be washed! If the dust container comes into

contact with water, soiling can adhere to the inside.

NOTE:

The dust container components are constructed so that they will only go

all the way down if in the right position. Do not use force upon insertion.

 Lower the reflector completely in the dust container (Fig. 26). Make

sure that its recess engages precisely in the protuberance of the dust

container.

 Lock the filter screen by tightening it approx. 3 – 4 rotations in clock-

wise motion (Fig. 27).

 Lock the main cyclone by tightening it approx. 15° in anti-clockwise

motion (Fig. 28 and 29).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil INFINITY REBEL 53 - DD5551 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info