Bedienungsanleitung Dirt Devil m 2730 0 centrino x3 (Seite 10 von 18) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

320859

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Maintenance

3 Maintenance

3.1 Emptying the dust container

 Empty the dust container after every

cleaning session in order to maintain the

suction power of your cylinder vacuum cleaner.

 Empty the dust container at the latest when

the "MAX" mark (Fig. 8/1./1) has been reached

or the cleaning indicator (Fig. 1/6) is showing in

the display window.

1. Unlatch the dust container by swaying its

retaining bracket upwards (Fig. 8/1.).

2. Then remove the dust container from its

mounting (Fig. 8/2.).

3. Empty the dust container by holding it low

over a dust bin and only then open the

bottom plate (Fig. 9/1).

4. At this occasion remove the cyclone unit by

turning it counter-clockwise (Fig. 9/2) and

clean it.

5. Remove any dust that may have collected

in the dust compartment.

6. Replace the cyclone unit by turning it

clockwise (Fig. 9/2).

7. Fold the bottom plate back up. It will click

into place audibly.

8. Also clean or exchange the dual motor

protection filter on this occasion. ZChapter

3.4, "Cleaning / changing the dual motor

protection filter".

9. Put the dust container back into its holder.

You must feel and hear it clicking into place.

3.2 Changing filters

 Dust and dirt particles can fix themselves to

the filters and reduce the airflow. Adhere to the

cleaning and changing intervals indicated

below.

 Replace a damaged filter without delay.

The following filters are installed:

 Dual motor protection filter (Fig. 10/1)

- Checking/cleaning: To maintain suction

power check the dual motor

protection filter after each vacuum

cleaning session. If the dual motor

protection filter is slightly dirty, it is

sufficient to pat out the dust. If it is heavily

soiled it must be thoroughly cleaned and

washed (ZChapter 3.4, "Cleaning /

changing the dual motor protection

filter").

- Changing: If the filter elements are too

dirty or it is no longer possible to clean

them, replace them with new filter

elements (ZChapter 5.1, "Consumable

parts").

 Exhaust filter (Fig. 10/2)

- Cleaning: depending on the degree of

soiling, but at least once per month

- Changing: every 6 months

3.3 Changing the exhaust filter

1. Switch off the appliance (ZChapter 2.4,

"Switching off").

2. Reach under the exhaust filter cover and

fold it upwards (Fig. 11/1).

3. Remove the exhaust filter (Fig. 11/2).

4. Pat the dust out of the exhaust filter. If it

cannot be sufficiently cleaned in this

manner, wash it thoroughly by hand and let

it dry for at least 15 hours before replacing

it into the appliance.

5. Put the cleaned or new hygienic exhaust

filter (ZChapter 5, "Spare parts") back into

its holder.

6. Set the exhaust filter cover into the back

end first and then fold it down until you can

feel and hear it clicking into place.

3.4 Cleaning / changing the dual

motor protection filter

1. Switch off the appliance, remove the dust

container and empty it ZChapter 3.1,

"Emptying the dust container".

2. First pull the motor protection filter cassette

out of its holder by the tab provided

(Fig. 12/1).

3. Then remove the motor protection filter

element (Fig. 12/2).

4. For a rough cleaning, tap against both parts

of the dual motor protection filter lightly from

all sides.

5. Put the motor protection filter element into

its holder in the correct position (Fig. 14/1).

6. Put the motor protection filter cassette into

its holder in the correct position (Fig. 14/2,

with the arrow pointing upwards). Push the

cassette back firmly from all sides and

check that it fits properly.

7. Replace the dust container It must catch

with an audible click. Check that the

container is firmly fitted before restarting

the appliance.

ATTENTION:

Switch off the appliance before emptying the

dust container (ZChapter 2.4, "Switching

off"). In this way, you will prevent dust from

damaging the appliance.

NOTE:

You can dispose of the contents of the dust

container with your regular domestic trash if

it contains no waste materials prohibited in

domestic trash.

MAX

1. 2.

NOTE:

If both parts of the dual motor protection filter

are extremely dirty, rinse them thoroughly

with a shower head (Fig. 13/1). Do not use a

brush or cleansers for this. Then leave the

filter element to dry (approx. 15 hrs at room

temperature, Fig. 13/2). Only put them back

into the appliance when they are completely

dry.

CentrinoX3.book Seite 10 Dienstag, 15. März 2011 10:07 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil m 2730 0 centrino x3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info