Bedienungsanleitung Dirt Devil m 2739 0 centrino x3 (Seite 9 von 18) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

321066

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Operation

2 Operation

2.1 Unpacking

1. Unpack the appliance with all its

accessories.

2. Check the contents for completeness and

possible damages. Information regarding

the scope of delivery ZPage 8, "Parts of the

appliance".

2.2 Assembly

1. Insert the end of the suction hose into the

intake opening (Fig. 1/2) as shown until you

feel it snap into place. Make sure that the

release catch is showing exactly to the right

resp. to the left.

2. Insert the handle into the upper end of the

telescopic tube (Fig. 1/3).

3. Attach the floor nozzle to the bottom end of

the telescopic tube (Fig. 1/1).

4. Adjust the length of the telescopic tube.

Press down the release latch on the tube

(Fig. 1/5) to do this. Then extend the

telescopic tube to the desired length. Let go

of the release catch of the telescopic tube

while pulling until it locks in place. You will

hear a distinct click.

5. Attach the supplied nozzles of your choice

to the accessory clip (Fig. 5/1).

Your cylinder vacuum cleaner is now ready for

use.

2.3 Vacuum cleaning

1. Attach the desired nozzle to the suction

tube (Fig. 2 or Fig. 4 according to the

surface to be cleaned ).

2. Pull out the power cord by the plug up to the

yellow mark (Fig. 6/5).

3. Insert the mains plug into a socket with

ground/safety contact.

4. Switch on the cylinder vacuum cleaner with

the on/off switch (Fig. 6/2).

5. Set the carpet/hard floor switch (Fig. 3/1)

depending on the type of flooring:

for short- and deep-pile carpets,

runners (Fig. 3/2).

for hard floors, e.g. laminate,

tiles, PVC, etc. (Fig. 3/3)

6. When working with the cylinder vacuum

cleaner, pull if after you like a sleigh.

2.4 Switching off

1. Switch off the cylinder vacuum cleaner with

the on/off switch (Fig. 6/2) and pull the plug

from the mains socket.

2. Keep the plug in your hand.

3. Push the cord retracting button (Fig. 6/1) to

retract the power cord.

2.5 Transportation & storage

 For transportation you can carry the

cylinder vacuum cleaner by the carrying-

handle.

 To park it or when not working with it you

can hook the parking-hook onto the parking-

bracket (Fig. 7/1).

 For storing the appliance you can hook

the storage hook onto the storage bracket

(Fig. 7/2).

It is recommended to retract the telescopic

tube first.(Fig. 1/5).

 Before storing it for a longer time empty

the dust container and dispose of the contents

properly. ZChapter 3.1, "Emptying the dust

container"

 Always store the appliance in a cool, dry

place and out of reach of children.

NOTE:

Immediately contact your dealer if you have

found damage resulting from transportation.

ATTENTION:

Always transport or ship the appliance in its

original packaging to avoid damage. Keep

the packaging for such an event.

Dispose of no longer needed packaging

material properly

WARNING:

Danger of injury! Only assemble the

appliance if it is not connected to the power

supply. Otherwise the machine might start up

and parts of your body, hair or pieces of

clothing might be sucked in.

WARNING:

Danger of injury! A damaged appliance must

never be used. Check the cylinder vacuum

cleaner and the power cord before each use.

WARNING:

Danger of injury! Make sure especially when

vacuum cleaning stairs that you always

remain above the appliance.

ATTENTION:

Only use the cylinder vacuum cleaner with

all filters intact, in dry condition and correctly

placed. Make sure that the openings of the

vacuum cleaner are not clogged. Otherwise

the vacuum cleaner might be damaged.

WARNING:

Danger of electric shock! If the red marking

(Fig. 6/4) is visible, retract the cord by

pressing the retract button (Fig. 6/1) to pull in

the cable up to the yellow mark again.

Otherwise the cord might break.

ATTENTION:

Follow the recommendations of the flooring

manufacturers.

NOTE:

Use the power control (Fig. 6/3) to adjust the

suction power to the type of floor to be

cleaned. With the bypass vent (Fig. 1/4) you

can quickly reduce the suction power if less

power is needed, e.g. to release objects

accidentally sucked in.

WARNING:

Danger of injury! During uncontrolled

retraction the power cord can whip around,

become an obstacle or overthrow objects.

Therefore keep the plug in your hand and

guide it during retraction of the power cord.

WARNING:

Danger of injury! Switch off the appliance

when not working with it and observe the

notices under ZChapter 2.4, "Switching off".

ATTENTION:

Make sure that you don't accidentally press

the dust container release catch when

carrying the cylinder vacuum cleaner.

ATTENTION:

Never store the appliance next to heat

sources (e.g. stoves or radiators). Avoid

exposing it to direct sunlight. Heat can

damage the appliance.

CentrinoX3.book Seite 9 Dienstag, 15. März 2011 10:07 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil m 2739 0 centrino x3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info