Bedienungsanleitung Dirt Devil M 7008 Cooper (Seite 11 von 23) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

500175

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

3 Operation

3.1 Unpacking and assembling

1. Unpack the appliance and all its accessories.

2. Check that the contents are complete and intact (Figs. 1-5).

3. Insert the end of the suction hose into the intake opening (Fig. 6) of the cylinder vacuum cleaner until you

hear and feel it locking into place.

4. Insert the handle into the upper end of the telescopic tube (Fig. 7/A).

5. Push the desired nozzle onto the lower end of the telescopic tube (Fig. 7/B).

6. Adjust the length of the telescopic tube. Press down the release latch on the tube (Fig. 7/C) to do this. Then

extend the telescopic tube to the desired length. Let go of the release catch while pulling until it locks in

place. You will hear a distinct click.

Your vacuum cleaner is now ready for use.

3.2 Vacuum cleaning

1. Attach the desired nozzle (Fig. 5).

2. When using the floor nozzle, adjust the "carpet/hard floor" selector according to the type of flooring:

- Carpet (Fig. 8): for deep- and short-pile carpets, runners, etc.

- Hard floor (Fig. 9): for laminate, tiles, PVC, etc.

3. Pull out the power cord until the yellow marking is visible. (Fig. 10/3).

4. Insert the mains plug into a socket with ground/safety contact.

5. Switch on the cylinder vacuum cleaner with the on/off switch (Fig. 11/2).

6. Set the power control (Fig. 11/1) to suit the type of floor to be cleaned.

7. When working with the vacuum cleaner, pull if after you like a sleigh.

NOTE:

Immediately contact your dealer if you have found damage resulting from transport.

ATTENTION:

Always transport or ship the appliance in its original packaging to avoid damage. Keep the packaging for

such an event.

Dispose of no longer needed packaging material properly.

WARNING:

Danger of injury! Only assemble the appliance if it is not connected to the power supply. Otherwise the

machine might start up and parts of your body, hair or pieces of clothing might be sucked in.

BCA

WARNING:

Danger of injury! A damaged appliance must never be used. Check the vacuum cleaner and the power cord

each time before using it.

WARNING:

Danger of injury! Especially when cleaning stairs take care that you always stand above the appliance.

ATTENTION:

Only use the cylinder vacuum cleaner with all filters intact, in dry condition and correctly fitted. Make sure

that no openings are clogged. Otherwise the vacuum cleaner might be damaged.

NOTE:

Your vacuum cleaner is equipped with a safety switch to prevent overheating. It automatically cuts off the

power supply if the motor is overheated. In this case switch off the vacuum cleaner and disconnect it from

the mains. Remove the cause of the overheating. Wait for about 45 minutes. After it has cooled off, you may

use the vacuum cleaner again.

ATTENTION:

Follow the recommendations of the flooring manufacturers. Make sure that the attached nozzle is suitable

for the particular type of flooring. Our (mini) turbo brush can only be used to vacuum surfaces that are

not sensitive. Do not clean any floors or objects with the (mini) turbo brush that you would not clean without

a second thought with a conventional brush. Therefore, do not clean sensitive or polished floor surfaces with

the (mini) turbo brush. Nor should you clean furniture, sensitive carpets, upholstery, covers, or any material

with a sensitive texture with the (mini) turbo brush. Otherwise material damage might occur. If in doubt,

refrain from using the (mini) turbo brush.

WARNING:

Danger of electric shock! If the red marking (Fig. 10/2) shows, press the cord retracting button (Fig. 10/1) to

pull in the cord up to the yellow mark (Fig. 10/1) again. Otherwise, the power cord may be damaged.

NOTE:

With the bypass vent (Fig. 1/5) you can quickly reduce the suction power if less power is needed, or

to release objects accidentally sucked in.

M7007_7008_Cooper_7lang_20110609.pdf 11 09.06.2011 18:30:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil M 7008 Cooper Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info