Bedienungsanleitung Dirt Devil M2700 - Centrino SX3 (Seite 11 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

500142

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

2 Operation

2.1 Before use

1. Unpack the appliance and all its accessories.

2. Check the contents for completeness and possible damages. Scope of delivery see Z Fig. 1.

3. Insert the end of the suction hose into the intake opening (Fig. 2) of the cylinder vacuum cleaner until you

hear and feel it locking into place. Make sure that the release catch is on the upper side.

4. Insert the handle into the upper end of the telescopic tube (Fig. 3/A).

5. Attach the floor nozzle to the bottom end of the telescopic tube (Fig. 3/B).

6. Adjust the length of the telescopic tube. Press down the release latch on the tube (Fig. 3/C) to do this. Then

extend the telescopic tube to the desired length. Let go of the release catch while pulling until it locks in

place. You will hear a distinct click.

7. Attach the supplied accessory nozzles to the accessory holder (Fig. 3/C1). If you put the furniture brush

(Fig. 1/4) onto to the crevice nozzle (Fig. 1/3), the twin holders can take 3 accessory nozzles. The

upholstery nozzle (Fig. 1/5) may then be attached to the remaining holder.

2.2 Vacuum cleaning

1. Push the desired nozzle onto the lower end of the telescopic tube or the handle (Fig. 4).

2. If using the floor nozzle, set the "carpet/hard floor" selector according to the type of floor to be cleaned

(Fig. 5):

- "Carpet" position (Fig. 5/A): for deep- and short-pile carpets, runners

- "Hard floor" position (Fig. 5/B): for smooth floors, e.g. laminate, tiles, PVC, etc.

3. Pull out the power cord by the plug up to the yellow mark (Fig. 6/1).

4. Insert the mains plug into a socket with ground/safety contact.

5. Switch on the vacuum cleaner by pushing the on/off switch with integrated power control (Fig. 6/4).

6. Adjust the suction power to suit the floor by turning the on/off switch with integrated power control (Fig. 6/4).

- By turning the control clockwise, suction power is increased, e.g. for removing deep-set dirt particles from

carpets, runners, crevices, etc.

- By turning it counter-clockwise, suction power is reduced, e.g. for cleaning drapes, etc.

ATTENTION:

Always transport or ship the appliance in its original packaging to avoid damage. Keep the packaging for

such an event.

Dispose of no longer needed packaging material properly.

NOTE:

Immediately contact your dealer if you have found damage resulting from transport.

BCA

WARNING:

Danger of injury! A damaged appliance must never be used. Check the cylinder vacuum cleaner and the

power cord each time before using the appliance.

WARNING:

Danger of injury! Especially when vacuum-cleaning stairs make sure that you always stand on a higher level

than the appliance.

ATTENTION:

Only use the cylinder vacuum cleaner with all filters intact, in dry condition and correctly fitted. Make sure

that no openings are clogged.

ATTENTION:

Before vacuuming, make sure that the fitted nozzle and the set suction power suit the surface to be cleaned.

Also observe the flooring manufacturer's recommendations. Our (optional) turbo brush serves solely to

vacuum non-sensitive carpets, runners, doormats, and the like. Do not clean any objects with the turbo

brush that you would not clean without a second thought with a conventional brush. Therefore, do not clean

furniture, or materials with a delicate texture, nor any other high-quality or polished substrates with the turbo

brush. Otherwise material damage might occur. If in doubt, refrain from using the turbo brush.

WARNING:

Danger of electric shock! If the red mark (Fig. 6/2) is showing retract the cable back to the yellow mark

(Fig. 6/1) using the carrying-handle with its integrated cable retraction button (Fig. 6/3). Otherwise, the

power cord may be damaged.

NOTE:

With the bypass vent (Fig. 7/1) you can quickly reduce suction power if less power is needed, e.g.to release

curtains accidentally sucked in.

M2700.book Seite 11 Mittwoch, 6. April 2011 2:50 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil M2700 - Centrino SX3 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info