Bedienungsanleitung Dirt Devil REBEL 22 - DD2220 (Seite 13 von 24) (Deutsch, Englisch, Französisch)

590983

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

3 Maintenance and care

3 Maintenan ce and care

3.1 Emptying the dust container and cleaning the motor protection filters

1. Switch off the appliance ( ).

2. Pull the plug out of the plug socket.

3. Remove the dust container (Fig. 17).

4. Empty the dust container (Fig. 18).

5. Take this opportunity to also check the filter elements (dual motor

protection filter and filter unit) in the dust container (Fig. 19 – 23).

6. If the filter elements (dual motor protection filter and filter unit) are dirty,

clean them under cold or lukewarm running water until all dirt has gone.

7. Leave the filter elements to dry after cleaning them with water

(approx. 24 hours at room temperature).

8. Put the filter elements back in (Fig. 24 – 29).

9. Replace the dust container (Fig. 30).

You should feel and hear it clicking into place.

click!

17 19

28 29

23 24

NOTE:

The dust container has to be emptied and cleaned regularly. Otherwise

emptying it will get harder and harder or smells and bacteria might

develop, depending on what you have vacuumed up.

Therefore, it is best to empty the dust container after each vacuuming

session.

Empty and clean the dust container at the latest when the cleaning/

emptying display lights up (Fig. 16).

Also empty and clean the dust container every 3 months at the latest

before storing for a long time or before sending the appliance.

CAUTION:

Switch off the appliance before removing the dust container. This will

prevent dust from damaging the appliance.

NOTE:

You can dispose of the dust container with your regular domestic trash

as long as it contains no waste materials prohibited in domestic trash.

CAUTION:

The filter elements are washable, but may not be cleaned in

dishwashers or washing machines.

Also, do not use cleaning agents or brushes with hard bristles to

clean the filter elements.

Leave the filter elements to dry after cleaning them with water

(approx. 24 hours at room temperature).

Only put them back into the appliance when they are completely dry.

Replace damaged or deformed filters immediately ZChapter 3.4,

‘Spare parts and accessories’).

NOTE:

The filter elements are constructed so that they will only go all the way

down if in the right position.

Nevertheless, it is helpful if you align the filter unit with respect to the

vacuum cleaner as shown in Fig. 25 before insertion.

Then lower the filter unit completely into the vacuum cleaner until the

three noses of the vacuum cleaner engage with the respective recesses

of the filter unit (Fig. 26 – 27).

Do not use force upon insertion. If the dust container lid (Fig. 29) will

not shut properly, then you have to take the parts out again and put them

back in.

CAUTION:

Never operate the appliance without the filters in place.

Never operate the appliance with damaged filters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil REBEL 22 - DD2220 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info