Bedienungsanleitung DJI Inspire 2 series - 2019 (Seite 30 von 75) (Englisch)

719093

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

INSPIRE 2

SERIES User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. You can connect the

aircraft to a computer via the USB port and export this data via DJI Assistant 2. This includes data

for the sensors, navigation system, devices, aircraft control, no-y zones, and vision system images.

Note that all data is encoded and only stored on your DJI device. Data does not upload to a DJI

server automatically, nor is it shared with DJI in any other way.

Attaching and Detaching the Propellers

Attaching the Propellers

Refer to "Attaching Propellers" for details.

Detaching the Propellers

Press down the spring pad and rotate the propeller lock to remover the propeller.

Be aware of the sharp edges of the propellers. Handle with care.

Use only the DJI approved propellers. Do not mix propeller types.

Check that the propellers and motors are installed correctly and rmly before every ight.

Ensure that all propellers are in good condition before each ight. DO NOT use aged,

chipped, or broken propellers.

To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are

spinning.

ONLY use original DJI propellers for a better and safer ight experience.

DJI Intelligent Flight Battery

The DJI Intelligent Flight Battery has a capacity of 4280mAh, voltage of 22.8V, and smart charge-

discharge functionality. It can only be charged with an appropriate DJI approved charger.

DJI Intelligent Flight Battery Functions

1. Battery Level Display: LEDs display the current battery level.

2. Auto-discharging Function: The battery automatically discharges to below 70% of total power

when it is idle (press the power button to check battery level will cause battery to exit idle state)

for more than 10 days to prevent swelling. It takes around 3 days to discharge the battery to

65%.It is normal to feel moderate heat emitting from the battery during the discharge process.

Discharge thresholds can be set in the DJI GO 4 app.

3. Balanced Function: Automatically balances the voltage of each battery cell when charging.

4. Over charge Protection: Charging automatically stops when the battery is fully charged.

5. Temperature Protection: The battery will only charge when the temperature is between 5 °C (41°F)

and 45°C (113°F).

6. Over Current Protection: Battery stops charging when high amperage (more than 10A) is detected.

7. Over Discharge Protection: Over-discharging can seriously damage the battery. Current output will

be cut off when the battery cell is discharged to 2.8V and not in ight mode. To extend ight times,

over-charging protection is disabled as batteries discharge during ight. In this instance, a battery

voltage below 2V, may cause a safety hazard such as a re when charged. To prevent this, the

battery will not be able to charge if the voltage of a single battery cell is below 2V. Avoid using any

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DJI Inspire 2 series - 2019 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DJI Inspire 2 series - 2019

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info