Bedienungsanleitung DJI Inspire 2 (Seite 28 von 75) (Englisch)

653248

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

INSPIRE 2

User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. This includes flight

telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft

to the PC through the USB port and launch the DJI Assistant 2.

Attaching and Detaching the Propellers

Attaching the Propellers

Refer to "Attaching Propellers" for details.

Detaching the Propellers

Press down the spring pad and rotate the propeller lock to remover the propeller.

Be aware of the sharp edges of the propellers. Handle with care.

Use only the DJI approved propellers. Do not mix propeller types.

Check that the propellers and motors are installed correctly and rmly before every ight.

Ensure that all propellers are in good condition before each ight. DO NOT use aged,

chipped, or broken propellers.

To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are

spinning.

ONLY use original DJI propellers for a better and safer ight experience.

DJI Intelligent Flight Battery

The DJI Intelligent Flight Battery has a capacity of 4280mAh, voltage of 22.8V, and smart charge-

discharge functionality. It can only be charged with an appropriate DJI approved charger.

DJI Intelligent Flight Battery Functions

1. Battery Level Display: LEDs display the current battery level.

2. Auto-discharging Function: The battery automatically discharges to below 70% of total power

when it is idle (press the power button to check battery level will cause battery to exit idle state)

for more than 10 days to prevent swelling. It takes around 3 days to discharge the battery to

65%.It is normal to feel moderate heat emitting from the battery during the discharge process.

Discharge thresholds can be set in the DJI GO 4 app.

3. Balanced Function: Automatically balances the voltage of each battery cell when charging.

4. Over charge Protection: Charging automatically stops when the battery is fully charged.

5. Temperature Protection: The battery will only charge when the temperature is between 5 °C (41°F)

and 45°C (113°F).

6. Over Current Protection: Battery stops charging when high amperage (more than 10A) is detected.

7. Over Discharge Protection: Over-discharging can seriously damage the battery. The current output

will be cut off once the battery cell is discharged to 2.8V when it is not in ight mode. To prolong

the ight time, the over-charging protection will be disabled when the batteries are discharging

during ight. In such case, the battery voltage will be below 2V, which may lead to safety hazard,

like re. Therefore, the battery will not be able to charge when the voltage of a single battery cell is

below 2V and please do not use that battery. Always be alert to avoid serious over-discharging, or

the battery will be permanently damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DJI Inspire 2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DJI Inspire 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info