Bedienungsanleitung DJI Mavic Pro V1.2 (Seite 57 von 60) (Englisch)

653246

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Appendix

Mavic Pro

User Manual

Using DJI Assistant 2

Use the DJI Assistant 2 to update the rmware for the remote controller and the aircraft simultaneously.

Follow the instructions below to update the rmware through DJI Assistant 2:

1. With the remote controller and the aircraft powered off, connect the remote controller to the computer

through the charging port using a micro USB cable.

2. Power on the remote controller and aircraft.

3. Launch DJI Assistant 2 and login with your DJI account.

4. Select “Mavic Pro” and click on the “Firmware Updates” on the left panel.

5. Select the rmware version that you wish to update.

6. Wait for the rmware to be downloaded and rmware update will start automatically.

7. Reboot the aircraft and the remote controller after the rmware update is complete.

The remote controller and the aircraft can also be updated separately.

If you connect the aircraft to the computer via the aircraft’s micro USB port, you are only able to

update the aircraft rmware.

The rmware update will take around 15 minutes. It is normal that the gimbal goes limp, aircraft

status indicator blinks abnormally and the aircraft reboots. Please wait patiently until the update

is complete.

Ensure the computer has access to the Internet.

Ensure the batteries have at least 50% power.

Do not disconnect the aircraft from the computer during rmware update.

Intelligent Flight Mode

Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and

Waypoints features to assist users to create professional shoots during the ight. Course Lock and Home

Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations.

Point of Interest, Follow Me and Waypoints mode enable aircraft to y automatically according to the

pre-set ight maneuvers.

Course Lock

Lock the current nose direction as the aircraft’s forward direction. The aircraft will

move in the locked directions regardless of its orientation (yaw angle).

Home Lock Pull the pitch stick backward to move the aircraft toward its recorded Home Point.

Point of Interest

The aircraft will orbit around the subject automatically to allow the operator can be

more focus on framing their shoot on the subject in Point of Interest.

Follow Me

A virtual tether is created between the aircraft and the mobile device so that the

aircraft can track your movement as you move. Note that Follow Me performance is

subject to the GPS accuracy on the mobile device.

Waypoints

Record a flight path, then the aircraft will fly along the same path repeatedly

while you control the camera and orientation. The ight path can be saved and

re-apply in the future.

Enable Multiple Flight Mode by launching the DJI GO 4 app > Camera View > > Multiple Flight Mode

before using the Intelligent Flight Mode for the rst time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DJI Mavic Pro V1.2 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DJI Mavic Pro V1.2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info