766080
16
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
16
Zones settings
The width of the warning and the correction zone can be set easily on
the transmitter unit. Both zones are independent of each other making it
possible to set either the warning zone
or the correction zone. Both zones have
range settings from 0 to a minimum 7 m.
Maximum width depends on the length
and the cross section of the antenna wire.
We recommend the use of the test
discharge lamp to set the zones width.
Place the test discharge lamp in contact
with each of the contact points as shown
in the picture (before doing so, make
sure that the device is not active - remove the battery from the receiver or
switch the transmitter unit o).
Now you can plug in the antenna connector with an antenna loop into
the antenna socket transmitter unit.
Inset the battery into the receiver and switch the transmitter unit on by
pressing the button.
Set the receiver in the mode 1 - 8 (see the section Stimulation Impulse
Setting)
From Main menu select Zones Settings. If the antenna wire is incorrectly
connected or interrupted, the unit will beep and symbol will be
displayed on the screen.
The widths of warning and correction zone are set by default to value 0.
Pressing ENTER in the Zones Settings menu moves the focus on the
screen to the Warning zone setting.
Select the distance where you want to define the boundary of the
warning zone, hold the receiver with the sign "d-fence" towards the
antenna wire about 30 cm above the ground or as high as where the dog
wears the receiver. Adjust the zone setting (0 - 600) on the transmitter
unit by pressing the buttons until the receiver emits a warning
sound signals.
Press ENTER to confirm your settings and to move focus to Correction
zone setting.
Select the distance where you want to define the boundary of the
correction zone, hold the receiver with the sign "d-fence" towards the
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dogtrace d-fence 6th Sense wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info