Bedienungsanleitung Dolmar 111 (Seite 22 von 28) (Englisch)

507648

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair of modern engines as well as all safety devices require qualiÞ ed technical training and a special work-

shop equipped with special tools and testing devices.

We therefore recommend that you consult a DOLMAR service centre for all work not described in this instruction manual.

The DOLMAR service centres have all the necessary equipment and skilled and experienced personnel, who can work out cost-

effective solutions and advise you in all matters.

To Þ nd your local distributor, please visit www.dolmar.com

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per-

formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the

prescribed maintenance work can lead to accidents!

The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must

be carried out by a DOLMAR service centre.

Page

General Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualiÞ ed service centre immediately

Saw chain Sharpen regulary, replace in good time 17-18

Chain brake Have inspected regularly at an authorized service centre

Guide bar Turn over to ensure even wear of bearing surfaces

Replace in good time 11

Before each start Saw chain Inspect for damage and sharpness 17

Check chain tension 11

Guide bar Check for damage

Chain lubrication Functional check 15

Chain brake Functional check 15

OFF switch,

Safety locking button,

Throttle lever Functional check 14

Fuel/oil tank

cap Check for tightness

Every day Air Þ lter, preÞ lter Clean 20

Guide bar Check for damage, clean oil intake bore 13

Guide bar support Clean, in particular the oil guide groove 13, 19

Idle speed Check (chain must not run) 15

Every week Fan housing Clean to ensure proper air cooling 9, 21

Starter cable Check for damage 21

Carburetor interior Clean (remove Þ lter cover for access) 20

Chain brake Clean the brake band (sawdust, oil) 19

Spark plug Check and replace if necessary

Mufß er Check tightness of mounting 9

Chain guide Check 9

Screws and nuts Check their condition and that they are Þ rmly secured.

Every 3 months Suction head Replace 19

Fuel, oil tanks Clean

Annually Chain saw Check at an authorized service centre

Storage Chain saw Clean exterior, check for damage. In case of damage,

have repaired by a qualiÞ ed service centre immediately

Guide bar/chain Demount, clean and oil slightly

Clean the guide groove of the guide bar 18

Fuel, oil tanks Empty and clean

Carburetor Run empty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar 111 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dolmar 111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info