Bedienungsanleitung Dolmar AM-3643 (Seite 19 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

507681

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENC007-7

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F).

Let a hot battery cartridge cool down before

charging it.

4. Charge the battery cartridge once in every six

months if you do not use it for a long period of

time.

FUNCTIONAL DESCRIPTION

Installing or removing battery cartridge (Fig. 1 &

CAUTION:

• Always switch off the tool before installing or removing

the battery cartridge.

• Make sure that you lock the battery cover before use.

Otherwise, mud, dirt, or water may cause damage to

the product or the battery cartridge.

To install the battery cartridge;

1. Pull the battery cover locking lever toward yourself

and open the battery cover.

2. Insert the battery cartridge in the direction shown in

the figure until a click is heard.

3. Insert the lock key in the place shown in the figure

as far as it will go.

4. Close the battery cover and push it on until it is

latched with the locking lever.

To remove the battery cartridge from the mower;

1. Pull the battery cover locking lever toward yourself

and open the battery cover.

2. Pull out the lock key.

3. Withdraw it from the tool while sliding the button on

the front of the cartridge.

4. Close the battery cover.

Battery converters (optional accessory)

WARNING:

• Before installing or removing the battery converters

AA-3618/AA-3618CL, remove the lock key.

AA-3618 (optional accessory) (Fig. 3, 4 & 5)

WARNING:

• When using the AA-3618, never attach it to any part of

your body. Attaching the AA-3618 to any part of your

body may cause a serious injury.

Slide the battery converter AA-3618 into the installation

hole until it stops.

Open out the battery cover on the mower and then slide

all the way and click the product mounting adapter of the

AA-3618 into the battery port on the mower.

Run the cord of the AA-3618 through the slit in the bat-

tery cover and close the battery cover.

Fit the cord of the AA-3618 into the upper holders on the

handle.

NOTE:

• When using the battery converter AA-3618 (optional

accessory), hook the power cord to the designated

holder on the mower. Failure to do so may cause the

cord to be cut off.

To remove the AA-3618 from the mower, open out the

battery cover and then press the hook on the battery

mounting side of the AA-3618.

AA-3618CL (optional accessory) (Fig. 6 & 7)

Open the battery cover and click in the AA-3618CL into

the battery port on the mower.

Close the battery cover.

To remove the AA-3618CL, press on the hook of the AA-

3618CL and withdraw it with both hands.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar AM-3643 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info