Bedienungsanleitung Dolmar AT-1831C (Seite 8 von 25) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

598407

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without

notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear

ear protection.

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of exposure in

the actual conditions of use (taking account of all parts

of the operating cycle such as the times when the tool

is switched off and when it is running idle in addition to

the trigger time).

1. Battery cartridge

2. Speed adjusting dial

3. Indication lamp

4. Power button

5. Lock-off lever

6. Hanger (suspension point)

7. Grip

8. Switch trigger

9. Guard

10. Wire guard

11. Cutting tool

12. Shoulder harness

13. Cap

14. Red indicator

15. Button

16. Power indicator

17. Reversing switch

18. A position depressed for normal

operation

19. B position depressed for weed

and debris removal

20. Star marking

21. Battery indicator

22. Most effective cutting area

23. Joint

24. Lock lever

25. Joint cover

26. Lever

27. Pipe (Cutting tool side)

28. Concave portion

29. Protrusion

30. Hex bolts

31. Cover

32. Clamps

33. Cutting tool side

34. Spacer

35. Grooves

36. Protector

37. Concave portions

38. Protector holder

39. Protrusions

40. Holes

41. Nylon cutting head

42. Metal guard

43. Receive washer

44. Hex wrench

45. Buckle

46. Hook

47. Hex bolt

48. 80-100 mm

Model AT-1831 C AT-1831 CD

Type of pipe Integrated pipe Splittable pipe

No load speed 3,500 - 6,000 min

-1

Overall length with nylon cutting head 1,843 mm

Split length — 982 mm

Cutting diameter with nylon cutting head 300 mm

Net weight 3.9 kg 4.1 kg

Rated voltage D.C. 18 V

Standard battery cartridge and charger

Always keep the combinations of

battery/charger on the right columns.

AP-183/LG-184

Noise Sound pressure level

Applicable standard or

directive

Model L

(dB (A)) Uncertainty K (dB (A))

AT-1831 C/AT-1831 CD 79 0.7 2000/14/EC

Vibration Front grip Rear grip

Applicable

standard or

directive

Model a

(m/s

)

Uncertainty K

(m/s

)

(m/s

)

Uncertainty K

(m/s

)

AT-1831 C/AT-1831 CD 2.5 1.5 2.5 1.5 EN786

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar AT-1831C Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info