Bedienungsanleitung Dolmar EB-165 (Seite 8 von 204) (Alle Sprachen)

599937

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

6. Additional safety rules for blower / mulcher

Always wear adequate protective clothing when

operating the tool to avoid injuries to face, eyes, hands,

feet, head or hearing. Use safety glasses or a face

shield, high boots or sturdy shoes, long trousers, work

gloves, a hard hat and ear defenders.

Do not start the tool when it is upside down or when it is

not in the operating position.

Switch the motor off and disconnect from power when

the tool is not being used, left unattended, being

cleaned, being moved from one place to another or

when the extension cord is entangled or damaged.

Do not operate the tool near people, especially children

or pets. Turn it off if they get too close. Maintain a safe

distance of at least 5 m from other people when using

the tool.

Never direct the blower tube towards bystanders or

pets. Never blow debris in the direction of bystanders

or pets. The operator is responsible for accidents or

hazards occurring to other people or their property.

Do not handle the plug or the tool with wet hands and

do not use the tool in the rain.

Use only outdoor rated extension leads that are so

marked. Keep the extension cord away from heat, oil

and sharp edges.

Ensure that the extension lead is secured in a manner

that prevents it from disconnecting from the plug whilst

in use.

Keep all the air intakes and the blower tube free of dust,

lint, hair and other material that may cause a reduction

in air ow.

Keep a balanced and stable stance while using the

tool.

Do not switch on the tool in enclosed or poorly ventilated

spaces or in the presence of ammable and/or explo-

sive substance such as liquids, gases and powders.

Do not get distracted and always concentrate on what

you are doing. Use common sense. Never operate the

tool when you are tired, sick or under the inuence of

alcohol or other drugs.

Do not operate this tool with long loose hair or loose

tting jewellery. Tie long loose hair back and remove

loose tting jewellery.

Do not allow the tool to pick up any burning or smolder

ing materials like ashes, cigarette butts etc.

Do not attempt to pick up breakable objects like glass,

plastics, china etc.

Do not use in mulching operation without the collection

bag tted.

Do not use the tool in either the mulcher or the blower

mode on gravel surfaces.

Only operate the tool during broad daylight or with

adequate articial light.

When the tool is not in use, store it in a dry place and

out of reach of children.

After use, disconnect the tool from the power supply and

inspect for wear and damage. If you have the slightest

doubts, contact an authorized service centre.

Only use the tool according to the instructions given in

this manual.

Check regularly that screws are tight.

Use only spare parts and accessories recommended by

the manufacture.

•

Do not try to repair the tool or access internal parts.

Contact authorized service centers only.

It is recommended that the tool should be used with a

Residual Current Device (RCD) with a tripping current

of no more than 30 mA.

ASSEMBLY

UNPACKING

Carefully remove the product and any accessories from

the box.

Inspect the product carefully to make sure no breakage

or damage occurred during shipping.

Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.

If any parts are damaged or missing, please call your

Dolmar service centre for assistance.

The tool is supplied with some components not as-

sembled. To assemble them, proceed as follows:

WARNING:

To prevent serious personal injury, make sure the switch

is in the OFF position, it is unplugged, and the impellers

have stopped before attaching or removing tubes.

ASSEMBLE AS A BLOWER (Fig. 3)

Slide blower tube forward until the notched areas on the

blower housing click into the slots on the tube.

ASSEMBLE AS A MULCHER (optional accessory)

(Fig. 2)

Slide the front and rear mulcher tubes together until

locked. (See Fig. 2.)

Pull the lock button forward to disengage the gate. Hold

the gate open. (See Fig. 2.1.)

Insert the “wedged” end clip of the mulcher tube into

the rear clip. (See Fig. 2.2.) Push the “hooked” end clip

of the mulcher tube into the front clip. (See Fig. 2.3.)

Press the lock button back to engage the mulcher tube.

(See Fig. 2.4.)

To remove mulcher tubes, follow the steps above in

reverse.

Insert the bag adaptor into the blower outlet. Lock the

bag adaptor with the lock button. To remove the bag,

simply press lock button and remove bag. (See Fig. 4.)

NOTE:

It may be necessary to remove the blower tube or

mulcher tubes to clear a blocked tube or impeller.

INSTALLING BAG WITH SHOULDER STRAP

(Fig. 4)

While standing in the operating position adjust the

length to t the operator’s size. Pull the tab to lengthen,

pull the strap to shorten.

OPERATION

CONNECTING THE POWER CORD (Fig. 5)

Secure the extension cord to the motor housing using

the cord retainer. This prevents accidental removal of

the electrical cord.

Connect the female end of the extension cord with the

plug of the unit.

•

Dolmar EB-165 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info