Bedienungsanleitung Dolmar EM-461 (Seite 13 von 21) (Englisch, Holländisch)

599943

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

insert a round rod through the central hole and support

the blade horizontally. A balance blade will remain

horizontal. If the blade is not balanced the heavy end will

rotate downwards. Reshape the heavy end until the blade

is currently balanced. To remove the blade (2), unscrew

the blade screw (3).

Check the conditions of the fan (1), and replace any parts,

which are damaged.

When reassembling, make sure that the cutting edges

face in the direction of the motor rotation. The blade screw

(3) must be tightened to torque 20-25 Nm.

WARNING: For service, replace the blade with:

DOLMAR 263001461 for EM-461 and EM-461 S only.

(Fig. 28, Fig. 29, Fig. 30, Fig. 31)

WARNING: Disconnect the electric cord from the

power supply.

WARNING: Protect hands by using heavy gloves

or a rag to grasp the cutting blades when replace the

blade.

12. EXTENSION CORDS

You should only use extension cords for outdoor use,

ordinary duty with a cross sectional area not less than

1.0 mm

Before using, check the supply and extension cords for

signs of damage during use, disconnect the cord for signs

of damage or aging. If the cord becomes damaged during

use, disconnect the cord from the supply immediately. DO

NOT TOUCH THE CORD BEFORE DISCONNECTING

THE SUPPLY. Do not use the appliance if the cord is

damaged or worn. Keep extension cord away from cutting

elements.

WARNING: Always ensure that the ventilation

openings are kept clear of debris.

13. MAINTENANCE AND CARE

WARNING: Before performing any maintenance

or cleaning work, always pull out the mains plug!

Do not spray the unit with water. Ingress of water may

destroy the switch-plug combination unit and the electric

motor. Clean the unit with a cloth, hand brush, etc.

Expert inspection is required, do not make any

adjustment by yourself, must contact Dolmar

authorized service centre:

a) if the lawn mower strikes an object.

b) if the motor stops suddenly.

c) if the blade is bent (do not align!).

d) if the motor shaft is bent (do not align!).

e) if a short-circuit occurs when the cable is connected.

f) If the gears are damaged.

g) If the V-belt is defective.

14. TROUBLESHOOTING

WARNING: Before performing any maintenance

or cleaning work, always pull out the mains plug and wait

until the cutter has come to a standstill.

CAUTION: Faults which cannot be rectified with

the aid of this table may be rectified by Dolmar authorized

service centre only.

15. ENVIRONMENTALLY

FRIENDLY DISPOSAL

According to EU directive 2002/96/EC on

electric and electronic equipment and its

implementation into national law, all electric

tools must be separately collected and

environmentally friendly recycled. Alternative

disposal: If the owner of the power tool does

not return the tool to the manufacturer, he is responsible

for proper disposal at a designated collection point that

prepares the device for recycling according to national

recycling laws and regulations.

This does not include accessories and tools without

electric or electronic components.

For European countries only

EC Declaration of Conformity

The undersigned, Tamiro Kishima and Rainer

Bergfeld, as authorized by Dolmar GmbH, declare that

the DOLMAR machine(s):

Designation of Machine: Lawn Mower

Model No./Type: EM-461, EM-461 S

Specifications: See “4. TECHNICAL DATA” are of series

production and

Conforms to the following European Directives:

2004/108/EC, 2006/42/EC, 2000/14/EC & 2005/88/

EC, 2006/95/EC

Fault Remedial action

Motor does not

run

Check mains connection cable.

Start on short grass or on an area which

has already been mown.

Clean discharge channel/housing-the

mowing blade must rotate freely.

Correct the cutting height.

Motor power

drops

Correct the cutting height.

Clean discharge channel/housing.

Have mowing blade resharpened/

replacedauthorized service centre.

Grass catcher

is not filled

Correct the cutting height.

Allow the lawn to dry.

Have mowing blade resharpened/

replacedauthorized service centre.

Clean the grille on the grass catcher.

Clean the discharge channel/housing.

Wheel drive

does not

function

Adjust the flexible cable.

Check the V-belt/gearsauthorized

service centre.

Check the drive wheels for damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar EM-461 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info