Bedienungsanleitung Dolmar ES-33A (Seite 26 von 189) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

507643

Zoom out

Zoom in

Vorherige Seite

1/189

Nächste Seite

................... Caution: kickback!

................... Protect against rain and damp!

................... Wear a helmet, goggles and ear protec-

tion!

................... Wear safety gloves!

................... Withdraw the mains plug!

................... First aid

......... Recycling

................... CE marking

........... Maximum permissible length of cut

.......... Direction of chain travel

................... Chain oil

............. Chain brake released/applied

................... Prohibited!

Intended use

The tool is intended for cutting lumbers and logs.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under unfavor-

able mains conditions can have adverse effects to the

operation of other equipment. With a mains impedance

equal or less than 0.35 Ohms it can be presumed that

there will be no negative effects. The mains socket used

for this device must be protected with a fuse or protective

circuit breaker having slow tripping characteristics.

ADDITIONAL SAFETY RULES

ENB098-1

1. Read the instruction manual in order to familiarize

yourself with operation of the chain saw.

2. Before using the chain saw for the first time,

arrange to have instruction in its operation. If this

is not possible, at least practice cutting round tim-

ber on a trestle before beginning work.

3. The chain saw must not be used by children or

young persons under 18 years of age. Young per-

sons over 16 years of age may be exempted from

this restriction if they are undergoing training

under the supervision of an expert.

4. Working with the chain saw requires a high level

of concentration. Do not work with the saw if you

are not feeling fit and well. Carry out all work

calmly and carefully.

5. Never work under the influence of alcohol, drugs

or medication.

Proper use

1. The chain saw is intended solely for cutting wood.

Do not use it for example to cut plastic or porous

concrete.

2. Only use the chain saw for operations described

in this instruction manual. Do not, for example,

use it to trim hedges or for similar purposes.

3. The chain saw must not be used for forestry work,

i.e. for felling and limbing standing timber. The

chain saw cable does not provide the operator

with the mobility and safety required for such

work.

4. The chain saw is not intended for commercial use.

5. Do not overload the chain saw.

Personal protective equipment

1. Clothing must be close-fitting, but must not

obstruct mobility.

2. Wear the following protective clothing during

work:

• A tested safety helmet, if a hazard is presented by fall-

ing branches or similar;

• A face mask or goggles;

• Suitable ear protection (ear muffs, custom or mould-

able ear plugs). Octave brand analysis upon request.

• Firm leather safety gloves;

• Long trousers manufactured from strong fabric;

• Protective dungarees of cut-resistant fabric;

• Safety shoes or boots with non-slip soles, steel toes,

and cut-resistant fabric lining;

• A breathing mask, when carrying out work which pro-

duces dust (e.g. sawing dry wood).

Protection against electric shock

................... The chain saw must not be used in wet

weather or damp environments, as the

electric motor is not waterproof.

1. Only plug the saw into earthed sockets in tested

electrical circuits. Check that the system voltage

matches that on the rating plate. Ensure that a

16 A line fuse is fitted. Saws used in the open air

must be connected to a residual current-operated

circuit-breaker with an operating current no higher

than 30 mA.

................... Should the connecting cable be dam-

aged, withdraw the mains plug immedi-

ately.

Safe working practices

1. Before starting work, check that the chain saw is

in proper working order and that its condition

RE Y

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar ES-33A Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info