Bedienungsanleitung Dolmar HT-2460 (Seite 10 von 31) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

507692

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Refuelling

- The engine must be switched off.

- Stop the engine during refuelling, keep away from naked ames and do not

smoke.

- Take care not to spill either fuel or oil in order to prevent soil contamination

(environmental protection).

Clean the Hedge Trimmer immediately after fuel has been spilt.

- Do not spill any fuel onto the engine. Wipe up if necessary to avoid re.

- Avoid any fuel contact with your clothing. Change your clothing instantly if fuel

has been spilt on it (to prevent clothing catching re).

- Inspect the fuel cap at regular intervals making sure that it can be securely

fastened and does not leak.

- Carefully tighten the fuel tank cap. Change location to start the engine (at least

3 meters away from the place of refuelling.)

- Never refuel in enclosed rooms. Fuel vapours accumulate at ground level. (Risk

of explosions.)

- Transport and store fuel only in approved containers. Make sure the fuel stored is

not accessible to children.

- Thoroughly clean the area around the tank cap to prevent dirt from getting into

the fuel tank.

- Unscrew the plug and ll the tank with fuel. Use a gauze funnel to lter the fuel.

- Tightly screw on the plug by hand only.

- Clean around the screw plug and the tank after refuelling.

- Always wipe up any spilt fuel to prevent a re.

Storage of fuel

- Fuel cannot be stored for an unlimited period of time.

- Purchase only the quantity required for a 4 week operation period.

- Use approved fuel storage containers only.

- Please make sure that there are no children or other people within a working

range of 15 meters, also pay attention to any animals in the working vicinity.

- Before use always check that the Hedge Trimmer is safe for operation. Check

the cutting device is not damaged, the control lever for easy action and check for

proper function of the I-O Switch.

Rotation of the cutting device during idling speed is not allowed.

Check with your dealer for adjustment if in doubt. Check for clean and dry

handles and test function of the I-O Switch.

- Start the Hedge Trimmer only in accordance with the instructions. Do not use any

other methods for starting the engine. (See Starting)

- Start the hedge Trimmer engine only after the entire assembly is done. Operation

of the engine is only permitted after all the appropriate accessories are attached.

Otherwise there is a risk of injury.

- Before starting, make sure that the cutting device has no contact with objects

such as branches, stones, etc.

- Before trimming, inspect area for wires, cords, glass, or other foreign objects

which could come in contact with the blade.

- Electrical shock. Be aware of any and all electric lines and electric fences. Check

all areas for electrical lines before cutting.

PRECAUTIONS BEFORE STARTING

3 meters

(10 feet)

15 meters

(50 feet)

360°

Diagrammatic

gure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar HT-2460 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info