Bedienungsanleitung Dolmar PS-350 (Seite 8 von 40) (Englisch)

507628

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

NOTE

Individuals with poor circulation who are exposed to excessive

vibration may experience injury to blood vessels or the nervous

system.

Vibration may cause the following symptoms to occur in the

Þ ngers, hands or wrists: ”Falling asleep” (numbness), tingling,

pain, stabbing sensation, alteration of skin colour or of the skin.

If any of these symptoms occur, see a physician!

SERVICE

Transport and storage

- When changing your location during work switch off the

chain saw and actuate the chain brake in order to prevent

an inadvertent start of the chain.

- Never carry or transport the chain saw with the chain run-

ning.

When the saw is hot, do not cover it (with a tarp, blanket,

newspaper or the like).

Let the saw cool down before putting it in a storage case

or vehicle. Saws with catalytic converter take longer to

cool down!

- When transporting the chain saw over long distances the guide

bar protection cover (delivered with the chain saw) must be

applied.

- Carry the chain saw with the tubular handle. The guide bar

points backwards (20). Avoid coming in contact with the mufß er

(danger of burns).

- Ensure safe positioning of the chain saw during car trans-

portation to avoid fuel or chain oil leakage.

- Store the chain saw safely in a dry place. It must not be stored

outdoors. Keep the chain saw away from children.

- Before storing the chain saw over a long period of time or ship-

ping it the fuel and oil tanks must be completely emptied.

Maintenance

- Before performing maintenance work switch off the chain

saw (21) and pull out the plug cap.

- Before starting work always check the operating safety of the

chain saw, in particular the function of the chain brake. Make

sure that the chain is always sharpened and tightened cor-

rectly (22).

- Operate the chain saw only at a low noise and emission level.

For this ensure the carburetor is adjusted correctly.

- Regularly clean the chain saw.

- Regularly check the tank cap for tightness.

Observe the accident prevention instructions issued by

trade associations and insurance companies. Do not

perform any modiÞ cations on the chain saw. You will put

your safety at risk.

Perform only the maintenance and repair works described in

the instruction manual. All other work must be carried out by

DOLMAR Service.

Use only original DOLMAR spare parts and accessories.

Using spare parts other than original DOLMAR parts or ac-

cesories and guide bar/chain combinations or lengths which

are not approved bring a high risk of accidents. We cannot

accept any responsibility for accidents and damage resulting

from using sawing devices or accesories which have not been

approved.

First aid

For the event of a possible accident, please make sure that a

Þ rst aid kit is always immediately available close by. Immediately

replace any items used from the Þ rst aid box.

When calling for help, give the following information:

- Place of the accident

- What happened

- Number of injured people

- Kind of injuries

- Your name!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar PS-350 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dolmar PS-350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info