Bedienungsanleitung Dometic ML155 SG (Seite 12 von 14) (Englisch)

652304

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Use and Operation

IImmppoorrttaanntt aaddvviissee ffoorr ssttoorraaggee

• The goods should only be stored in the provided

drawers and/or racks.

• The loading must never obstruct the air-inlet-

openings inside the unit.

• Make sure that the loaded goods do not tilt to the

backside.

• Make sure that the loading does not touch the

reference bottle of the display sensor.

• Do not overload the unit.

AAllaarrmm ssiittuuaattiioonnss

• On the occurrence of an alarm situation attempts

must be made to find out the reason for the

alarm and remove it as quickly as possible. If that

is not successful the necessary measures must

immediately be taken so that the stored goods do

not sustain any damage.

• At a temperature alarm the red LED alarm lights

up and an acoustic signal sounds. In addition the

corresponding alarm message appears on the

display.

• In the case of a powerfail alarm the green power

LED and the red LED alarm flash and an acoustic

signal sounds. The display is switched off but be

temporarly switched on again by pressing any

key.

After a given time (setting: EXTRA - DISPLAY -

BACKL. TIMEOUT ) the display switches off again.

The acoustic alarm can be suppressed for a set

time by pressing the ENTER button. During a

powerfail phase no parameters can be changed.

• If the internal temperature rises above the upper

limit during a powerfail phase a temperature

alarm is triggered and entered into the History

list. In the case of a door alarm the red LED lights

up and an acoustic signal sounds. In addition the

corresponding alarm message appears on the

display

AAllaarrmm HHiissttoorryy

• The alarm history list contains all relevant data

on temperature and powerfail events. The list

contains up to 20 alarm situations.

• The status message “HISTORY” indicates that

new entries have been made in the list.

• The alarm history list can be accessed via the

“SHOW HISTORY” function in the EXTRA menu.

Within the list you navigate by means of the UP

and DOWN buttons. The first and last entry in the

list are marked “BEGIN OF LIST” and “END OF

LIST”

• The following information is stored in the Alarm History :

 Temperature alarm :

ALARM : type of alarm (HIGH ALARM or LOW ALARM)

START : Start date and time of alarm situation

END : End date and time of alarm situation

AVG : Average temperature on the display sensor during the alarm situations.

MAX / MIN : Maximum or minimum temperature value on the display sensor during

the

alarm situation (depending on the type of temperature alarm)

 Powerfail alarm :

ALARM : POWERFAIL

START : Start date and time of alarm situation

END : End date and time of alarm situation

AVG : Average temperature on the display sensor during the alarm situations

• To delete the alarm history, select the function “DELETE HISTORY” from the EXTRA menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dometic ML155 SG Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dometic ML155 SG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info