Bedienungsanleitung Dometic TEC40 (Seite 12 von 528) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

517881

Zoom out

Zoom in

Vorherige Seite

1/528

Nächste Seite

TEC 40D

- 14 - Istruzioni per uso, manutenzione e installazione

RULES FOR MOVEMENT AND INSTALLATION

– Lift and move the unit as described by the manufacturer and indicated on the packaging,

on the unit itself and in the user manual.

– The staff loading, unloading and moving the unit, must have experience and abilities gained

and recognised in the sector in question, and must be familiar with the lifting equipment

to be used.

– Loading and transport must be carried out using means of adequate capacity, anchoring

the unit at the points foreseen by the manufacturer. Those authorised to carry out these

operations must have specic experience and abilities, so as to safeguard themselves and

any other persons involved.

– All phases of installation must be considered, from the time the general plan was drawn up.

Before starting these phases, as well as dening the installation area, the person authorised

to carry out these operations must, if necessary, implement a “safety plan” to safeguard the

persons directly involved from harm, and must scrupulously follow all laws, with particular

reference to those regarding mobile work sites.

– For equipment installation, choose an area with a slope of no more than 20°, with a support

plane that is stable and has a load coefcient that is adequate to support the weight.

– During equipment installation, keep the area free of ammable substances (gas, paint,

etc.) and ensure that the hot parts never come into contact with easily ammable materials.

– It is necessary to ensure that the installation area has been provided with all the suction,

power supply and drainage connections required.

– During installation, respect the perimeter areas indicated by the manufacturer, also

bearing in mind all the other operations in the surrounding areas. This requirement must

be implemented in such a way as to comply with current laws on safety at work.

– Installation and connection must be carried out according to the manufacturer’s instructions.

The person in charge must also take into account all legal requirements and rules, and

must carry out all installation and connection operations in a workmanlike manner. When

installation has been completed, before use, he must carry out a general check to ensure

these requirements have been met.

RULES FOR OPERATION AND USE

– As well as being suitably trained and informed regarding use of the unit, the operator

must have the abilities and knowledge required for the type of work to be carried out.

Do not allow the equipment to be used by people who are not adequately capable and

competent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dometic TEC40 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info