Bedienungsanleitung Domo B3974 (Seite 48 von 102) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

738945

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

B3974

7. Select the program you require, using the ‘menu’ button. Each input is conrmed by a bleeping

signal.

8. Set the color of the crust using the Color button. You can choose between light, medium, or dark.

Set the size of the bread (750 g, or 1000 g) with the Weight button.

9. Program the time delay function, if so desired.

10. Press the ‘start-pauze/stop’ button. The colon will start ashing, which indicates the bread maker

has started the process. When you have programmed the time delay function, the program will start

after the programmed time delay has expired.

11. When your bread is ready, the machine will beep. Keep the ‘start/stop’ button pressed down for

a few seconds. The appliance will beep again to conrm the baking process has been terminated.

Disconnect the plug from the power socket and open the lid of the bread maker. Put on oven mitts in

order to remove the bread pan from the bread maker.

12. Allow the bread to cool down for approximately 10 minutes. Turn the bread pan upside down above

the sink and gently shake it to remove the bread. Should you have diculty removing the bread

from the bread pan, carefully turn the kneading paddle at the bottom of the bread pan until the

bread comes loose.

· Please make sure the bread and the bread pan are never placed on the exterior of the appliance. Nor

must they ever be placed directly on a plastic table-cloth.

· If a kneading paddle should get stuck in the bread, try and remove it as gently as you can.

· We recommend that you wait 15 to 20 minutes before cutting the bread.

· Rinse the baking pan with warm water immediately after removing the bread to ensure that the

dough hook does not stick to the axle.

· Do not start the bread maker if it has not yet cooled down.

WARMING FUNCTION

In case you should not make it home in time, the bread maker will continue

to heat the bread for another 60 minutes. This additional time is not included in the

program time. Press the ‘start-pauze/stop’ button for a few seconds, if you want to interrupt this part of

the process. If you leave the bread in the bread maker for more than an hour, it will become moist.

ADDING ADDITIONAL INGREDIENTS

A beep will sound during the kneading part of the following programs: Normal, French, Wholegrain,

Sweet, Gluten-Free, and Sandwich. This beep indicates that you can add additional ingredients such as

raisins, nuts, seeds, etc. Open the lid, add the additional ingredients, then close the lid. The kneading will

then continue.

REMOVING THE KNEADING PADDLE BEFORE BAKING

You can remove the kneading paddle, after the dough has been kneaded for the last time.

1. Shortly press the ‘start/stop’ button to interrupt the baking process or disconnect the plug from the

power socket.

2. Open the lid and take out the bread pan. Take out the dough with oured hands and remove the

kneading paddle.

3. Place the dough back in the bread pan and close the lid.

4. Insert the plug into the power socket and press the ‘start/stop’ button. The program will be

continued.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Domo B3974 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Domo B3974

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info