112408
19
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
DO315IP
edges and/or hot surfaces.
Commissioning the device
Prior to connecting the device, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to
grave damage on the device and injury to persons.
The hotplate’s surface consists of temperature-resistant ceramics. In case of damage,
even if this concern only a small tear, disconnect the device from the power supply
immediately and contact the customer service.
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or
other metal objects on the hotplate. These may heat up when the device is turned on.
Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
On order to avoid overheating, do not place any aluminium foil or metal plates on the
device.
Do not insert any objects like wires or tools into the ventilation slots. Attention: this
may cause electric shocks.
Do not touch the hot surface of the ceramic fi eld. Please note: the induction hotplate
does not heat up itself during cooking, but the temperature of the cookware heats up
the hotplate!
Do not heat up any unopened tins on the induction hotplate. A heated tin could
explode; therefore remove the lid under all circumstances beforehand.
Scientifi c tests have proven that induction hotplates do not pose a risk. However,
persons with a pacemaker should keep a minimum distance of 60 cm to the device
while it is in operation.
OPERATING THE DEVICE
Plug the power plug into a suitable outlet.
The control lamp of the ON/OFF switch lights up and an acoustic signal sounds.
Now the device is in standby mode.
Place suitable cookware in the centre of the hotplate.
Now press the ON/OFF switch once to turn the induction hotplate on. The control
lamps of “HEAT” blinks and an acoustic signal sounds. (NOTE: should no further
operation in 30 seconds after pressing ON/OFF key, the control lamp of HEAT in
the display goes off and then the unit goes back to standby status automatically. To
reoperate the unit, simply press ON/OFF key and other function keys).
Press the Function Key HEAT. The preset power stage “5” is selected and the device
turns on.
With the knob, you can change the settings at any time in a range from 1 – 10.
Press the Function Key TEMP. to select the temperature. The preset temperature stage
“120°C” is selected and the device turns on.
With the knob, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
Timer Function. After the selection of the temperature mode press the but key TIMER
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Domo DO 315 IP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info