Bedienungsanleitung Domo DO7253S (Seite 37 von 52) (Deutsch, Englisch, Holländisch, Französisch)

564952

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

DO7253S

MAINTENANCE

Check the hose, dust bag and lter regularly. Empty the hose when it is clogged,

replace the dust bag when it is full and clean the lter when it is dirty.

Disposable dust bags and lters

The dust bag and the motor lter play a very important roll in the efciency of the

vacuum cleaner. The purpose of the dust bag is to capture dirt, but at the same time

the lter needs to be porous enough to allow air to pass through. If the bag or motor

lter get clogged, no air can pass through the cleaner and no cleaning can take place

regardless of how powerful the unit is.

To keep the cleaner operating at maximum efciency, change the dust bag

frequently and clean the lter when needed. Some ne particles can restrict the

air ow very quickly and will decrease the performance even before the bag appears

to be full. For that reason, the bag and lter may need to be changed more often

when vacuuming carpet fresheners or cleaners, powder, plaster dust or similar ne

substances.

Replacing the dust bag and cleaning the motor lter

Be sure to turn off and unplug the vacuum cleaner before replacing the dust bag or

cleaning the lter. Never vacuum without the dust bag or lter in place.

1. Turn off and unplug the vacuum cleaner.

2. Remove the hose from the hose connection and open

the dust bag compartment by pushing the handle

upwards and lifting the lid.

3. Grasp the dust bag frame and pull the frame with the

dust bag out of the dust bag compartment.

4. Remove the dust bag from the frame and slide in a new

dust bag (3,5l).

5. Remove the motor lter by pressing it down a bit and

clean it when it is dirty by rinsing it under warm water.

Let the lter air dry completely before installing it

again. Reinstall the lter before placing the dust bag.

6. Place the dust bag frame into the dust bag compartment

by sliding the frame into the slot at the front of the

compartment.

7. Close the dust bag compartment and make the lid lock

into place.

Cleaning the air lter or HEPA lter

The exhaust air lter or HEPA lter cleans the air a nal time before it leaves the

vacuum cleaner. This lter and the grid that covers the lter should be cleaned

regularly. You can clean the lter as follows:

1. Turn off and unplug the vacuum cleaner. Always pull

the plug itself, never pull the cord.

2. Open the grid that covers the lter by lifting up the two

clips on the grid, one by one. The lter is visible when

the grid is removed.

3. Take out the lter.

4. Rinse the lter under cold water and let it dry

completely.

5. Put the lter back into place or replace the lter by a

new one. Make sure that the lter is placed properly.

6. Seal with the grid. Make sure that the grid clicks into

place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Domo DO7253S Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info