Bedienungsanleitung Domo DO937DV (Seite 36 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

775753

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

DO937DV

· Install the handle.

· Allow the appliance to stand for 24 hours before turning it on. This allows the cooling agent to settle.

· After installation, let the freezer turned on for 12 hours before using it. This way the desired

temperature can be reached.

· The climate class indicates the minimum and maximum ambient temperature for the proper operation

of an appliance. You can nd the climate class on the type plate on the back of the appliance.

· SN: Subnormal: ambient temperature between 10°C and 32°C

· N: Normal: ambient temperature between 16°C and 32°C

· ST: Subtropical: ambient temperature between 16°C and 38°C

· T: Tropical: ambient temperature between 16°C and 43°C

DOOR CONVERSION

The freezer has a reversible door. If you need to hinge your door on the opposite side it is recommended

that you call your local authorised service agent to make this conversion or ask a technician.

Before you reverse the door, you should ensure the appliance is unplugged and empty.

1. Remove the screws on the back of the top cover.

Reverse Door

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.

Ensure the unit is unplugged and empty.

To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid

so that it will not slip during the door reversing process.

All parts removed must be saved to do the reinstallation of the door.

Do not lay the unit flat as this may damage the coolant system.

It's better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

avoid scratch.

4. Unscrew bottom hinge. Then remove the adjustable feet from both

side.

unscrew

2. Remove the top cover from the freezer.

Reverse Door

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.

Ensure the unit is unplugged and empty.

To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid

so that it will not slip during the door reversing process.

All parts removed must be saved to do the reinstallation of the door.

Do not lay the unit flat as this may damage the coolant system.

It's better that 2 people handle the unit during assembly.

1. Remove two screws at rear side of top cover.

2. Remove top cover and thermostat knob, then place it aside.

3. Unscrew top hinge and then remove door and place it on a soft pad to

avoid scratch.

4. Unscrew bottom hinge. Then remove the adjustable feet from both

side.

unscrew

3. Remove the three screws and then remove the top hinge that holds the door in place. Lift the door

and place it on a padded surface to prevent it from being scratched.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Domo DO937DV Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info