Bedienungsanleitung Doro 1362 (Seite 1 von 2) (Englisch)

762146

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

www.doro.com



Press the card’s lid carefully towards the

assistance buon unl it “clicks”. Li the lid

to an upright posion. Make sure the card’s

contacts are facing downwards. Fold down the

lid and carefully push it down, sliding it back in

place.

Note! The circuit boards (metal part) on the

cards must not be scratched or bent. Try not

to touch the circuits with your ngers.



Insert the baery by

sliding it into the baery

compartment with the

circuits facing down to

the right. Replace the

baery cover.





1. Enter the phone number. Delete with .

2. Press to dial. Press Abort to cancel

the call.

3. Press to end the call.

Note! For internaonal calls, always use +

before the country code for best operaon.

Press * twice for the internaonal prex +.



1. Press  to open the phonebook.

2. Use / to scroll through the

phonebook, or quick search by pressing the

key corresponding to the rst leer of the

name.

3. Press  â , alternavely, press

to dial the selected entry, or press

Back to return to standby.

3. PHONEBOOK

The Phonebook can store 100 entries with 3

phone numbers in each entry.

Add a contact

1. Press Menu â Phonebook â

-New contact- â Add.

2. Enter a  for the contact, see Enter

text. Delete with .

3. Use / to select ,

 or , and enter the phone

number(s) including the area code.

4. When done, press Save.

Doro 1362

Quick Start GuideQuick Start Guide

1. Speaker

2. Le selecon buon

3. Call buon

4. Voicemail

5. Keypad lock and

Internaonal prex/

symbols

6. Silent /

Input method

7. Scroll buons

8. End call /

Power on/

9. Right selecon

buon

10. Torch buon

11. Torch

12. Headset socket

13. Camera

14. Assistance buon

15. Loudspeaker

16. Microphone

17. Charging cradle

connectors

18. Charging socket

1. GET STARTED





Be careful not

to damage your

ngernails when

you remove the

baery cover. Do

not bend or twist

the baery cover

excessively as it may

be damaged.



Remove the baery if it is

already installed. There are

two SIM card slots, SIM1

and SIM2. If you are to

use only one SIM card, we

recommend to use SIM1

slot.

Slide the card under the

metal part, with the gold-

coloured circuit board

facing down.

The cut-o corner of

the card helps to you place the card, correct

placement is indicated in the compartment.

Charge the phone

CAUTION

Only use baeries, charger and accessories

that have been approved for use with

this parcular model. Connecng other

accessories may be dangerous and may

invalidate the phone’s type approval and

guarantee.

When the baery is running low, is

displayed and a warning signal is heard.

• Connect the mains adapter to the wall

socket and to the charging socket y.

Tip: Don’t forget to remove the protecve

plasc lm from the display.

2. GET TO KNOW YOUR PHONE



1. Press and hold the red buon on the

phone to turn it on/o. Conrm with Yes to

power o.

2. If the SIM card is valid but protected with a

PIN code (Personal Idencaon Number),

Input SIM1 PIN is displayed. Enter the PIN

code and press OK. Delete with .

Note! If PIN and PUK codes were not provided

with your SIM card, please contact your

service provider.

 shows the number of PIN

aempts le. When no more aempts remain,

 is displayed. The SIM card must

now be unlocked with the PUK code (Personal

Unblocking Key).

1. Enter the PUK code and conrm with OK.

2. Enter a new PIN code and conrm with OK.

3. Re-enter the new PIN code and conrm

with OK.

Start-up wizard

When starng the telephone for the rst me,

you can use the start-up wizard to set some

basic sengs.

Tip: You can run the start-up wizard later if

you want.



In this document the arrow (â) indicates next

acon in the step-by-step instrucons.

To conrm an acon in the phone, press OK. To

select an item, scroll or highlight the item using

/ and then press OK.

Enter text

• Press a numerical key repeatedly unl the

desired character is shown. Wait a few

seconds before entering the next character.

• Press * for a list of special characters.

Select the desired character with /

and press OK to enter it.

• Use / to move the cursor within the

text.

• Press # to cycle upper case, lower case and

numerals.

• Press and hold # to change wring

language.



The default language is determined by the SIM

card.



1. Press to answer, or press  to

switch o the ring signal and then Reject

(busy signal).

Alternately, press to reject the call

directly.

2. Press to end the call.



Use / to adjust the sound volume

during a call. The volume level is indicated on

the display.



Silent is a xed prole with keypad tone,

message tone and ring tone disabled, while

vibraon, tasks and alarm are unchanged.

• Press and hold # to acvate and to

deacvate silent.



During a call the so keys ( ) give access to

addional funcons.



Use 0 and 2–9 to speed dial an entry from

standby.

• Press and hold the corresponding buon to

dial.



1. Press Menu â  â Phonebook â

.

2. Select 0 â Add and select an entry from

the phonebook.

3. Press OK to conrm.

4. Repeat to add speed dial entries for buons

2–9.



As long as the phone is switched on, it is always

possible to place an SOS call by entering the

main local emergency number for your present

locaon followed by .



Received, missed, and dialled calls are saved in

a combined call log. 20 calls of each type can

be stored in the log. For mulple calls related

to the same number, only the most recent call

is saved.

1. Press .

2. Use / to scroll through the call log.

= 

= 

= 

3. Press to dial, or .



In the event of a trauma, it is crical to have

this informaon as early as possible to increase

the chances of survival. Add ICE contact to

improve your own safety. First responders

can access addional informaon such as

medicaon and next of kin from your phone in

case of an emergency. All elds are oponal,

but the more informaon provided the beer.

Press Menu â Phonebook â ICE.

5. Use / to scroll the list of entries.

6. Press Edit to add or edit informaon in each

entry. Delete with .

7. Press Save when done.

4. ASSISTANCE BUTTON

The assistance buon allows easy access to

contact your predened help numbers should

you need help. Make sure that the assistance

funcon is acvated before use and make all

necessary conguraons.Test the applicaon

thoroughly.



1. When help is needed, press and hold the

assistance buon for 3 seconds, or press it

twice within 1 second.

The assistance call begins aer a delay of

5 seconds. In this me you can prevent a

possible false alarm by pressing .

2. An assistance text message (SMS) is sent to

all recipients. The rst recipient in the list

is dialled. If the call is not answered within

25 seconds, the next number is dialled.

Dialling is repeated 3 mes or unl the call

is answered, or unl is pressed.

CAUTION

When an assistance call is acvated the phone

is pre-set to handsfree mode. Do not hold

the device near your ear when the handsfree

mode is in use, because the volume may be

extremely loud.



• Press Menu â  â Assistance.

5. MESSAGES



1. Press Menu â Messages â Create new

â SMS.

2. Write your message, see Enter text, then

press To.

3. Select a recipient from 

Phonebook.

Alternavely, select  to add

recipient manually and press OK.

4. You can modify the recipients by selecng

one and press  â Edit//

.

5. When done, press  â Send.



Both you and the recipient must have sub-

scripons that support picture message. The

sengs for picture message are supplied by

your service provider and can be sent to you

automacally via text message.

1. Press Menu â Messages â Create new

â MMS.

2. Write your message, see Enter text.

3. Press  â Add picture:

•  to select a le.

• Take picture to use the camera to take a

picture.

Note! To keep best picture quality, send only

one picture per message.

You can also Add sound, Add video, and

Preview MMS using the  menu.

4. Press  â Add subject and enter

your subject, then press  â Done.

5. Press  â To and select recipient

from .

Alternavely, select Enter recipient to add

recipient manually and press  â

Done.

6. Press  â Send to send.



• Press Menu â  â Messages.

English

Note! All illustraons are for illustrave

purposes only and may not accurately depict

the actual device. The items supplied with your

phone might vary depending on the soware

and accessories available in your region or

oered by your service provider. You can obtain

addional accessories from your local Doro

dealer. The supplied accessories provide the

best performance with your phone.

Doro 1362 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info